Pioneer PDP-425CMX manual QPI Obtaining Integrator/PICTURE information

				RS-232C Adjustment
2) <QPI> Obtaining Integrator/PICTURE information
Sequence	Data Content	Size		Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QPI (fixed)
3	CONTRAST	3 Byte	000 to 255	Note 1)
4	BRIGHTNESS	3 Byte	000 to 255	Note 1)
5	C,DETAIL R (RED)	3 Byte	000 to 060	Note 1)
6	C,DETAIL Y (YELLOW)	3 Byte	000 to 060	Note 1)
7	C,DETAIL G (GREEN)	3 Byte	000 to 060	Note 1)
8	C,DETAIL C (CYAN)	3 Byte	000 to 060	Note 1)
9	C,DETAIL B (BLUE)	3 Byte	000 to 060	Note 1)
10	C,DETAIL M (MAGENTA)	3 Byte	000 to 060	Note 1)
11	H.ENHANCE	3 Byte	000 to 015 Note 1), Note 2)
12	V.ENHANCE	3 Byte	000 to 015 Note 1), Note 2)
13	COLOR	3 Byte	000 to 127 Note 1), Note 3)
14	TINT	3 Byte	000 to 060 Note 1), Note 3)
15	SHARPNESS	3 Byte	000 to 015 Note 1), Note 3)
16	Main input function	3 Byte	Same as item 9 of QST commands
17	Main screen size information	1 Byte	Same as item 11 of QST commands
21	Check sum	2 Byte
22	ETX	1 Byte	03hex
Note 1)	If the signal type is not confirmed, dummy data is output.
Note 2)	During video signal input, dummy data is output.
Note 3)	During PC signal input, dummy data is output.
3) <QWB> Obtaining integrator/WHITE BALANCE information
Sequence	Data Content	Size		Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QWB (fixed)
3	R.HIGH	3 Byte	000 to 255	Note 1)
4	G.HIGH	3 Byte	000 to 255	Note 1)
5	B.HIGH	3 Byte	000 to 255	Note 1)
6	R.LOW	3 Byte	000 to 255	Note 1)
7	G.LOW	3 Byte	000 to 255	Note 1)
8	B.LOW	3 Byte	000 to 255	Note 1)
9	Main input function	3 Byte	Same as item 9 of QST commands
10	Main screen size	1 Byte	Same as item 11 of QST commands
11	Check sum	2 Byte
12	ETX	1 Byte	03hex
Note 1)	If the signal type is not confirmed, dummy data is output.

4) <QPS> Obtaining integrator/SCREEN information

Sequence	Data Content	Size		Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QPS (fixed)
3	H.POSITION	3 Byte	000 to 255	Note 1)
4	V.POSITION	3 Byte	000 to 255	Note 1)
5	H.SIZE	3 Byte	000 to 064	Note 1)
6	V.SIZE	3 Byte	000 to 064	Note 1)
7	CLOCK	3 Byte	000 to 255 Note 1), Note 2)
8	PHASE	3 Byte	000 to 031 Note 1), Note 2)
9	Main input function	3 Byte	Same as item 9 of QST commands
10	Main screen size information	1 Byte	Same as item 11 of QST commands
21	Check sum	2 Byte
22	ETX	1 Byte	03hex

Note 1) If the signal type is not confirmed, dummy data is output.

Note 2) During DVI or video input, dummy data is output.

15