RCA PSP42300 user manual Installing the Cinema Screen Monitor

Page 44

REFERENCE

INSTALLING THE CINEMA SCREEN MONITOR

IMPORTANT

•This device cannot stand on its own. Be sure to use a stand or original mounting unit.

•For correct installation and mounting it is strongly recommended to use a trained, authorized Cinema Screen dealer. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer. Product warranty does not cover damage caused by improper installation.

ATTACHING OPTIONAL MOUNTS OR STAND TO THE CINEMA SCREEN MONITOR

The Cinema Screen monitor can be mounted on the wall using an optional wall mount or you can attach a floor stand (also optional). For more information on mounting your Cinema Screen Display, see your Cinema Screen dealer.

If you choose to use the optional wall mount, it can be attached to the Cinema Screen monitor in one of the following two ways:

•While it is upright.

•While it is laying with the screen face down. If you choose this option, lay the protective sheet that came wrapped around the monitor beneath the screen surface so it doesn’t get scratched.

VENTILATION REQUIREMENTS FOR ENCLOSURE MOUNTING

To allow heat to disperse, leave space between surrounding objects as shown on the diagram below when installing.

WALL

31mm (1.22”)

31mm (1.22”)

1110mm (43.7 ”)

50mm (2”) WALL

748mm (29.5”)

50mm (2”)

VENTILATION SPACE AROUND UNIT

42

Image 44

Contents Page Page Precautions Declaration of ConformityImportant Tips Caring for Your Contents Reference Setup and Connections Getting StartedContents of the Package Attaching the Ferrite CoresPart Names and Functions Front View Part Names and Functions Back View Back of the HD Receiver Battery InstallationConnecting AN HD Receiver Connecting a Personal Computer Connecting Your VCR or Laserdisc PlayerConnecting Your DVD Player Connecting Components to the Cinema Screen Monitor Personal computer with a digital RGB outputConnecting External SPEAKERS* to the Cinema Screen Monitor Quick Tour of the Remote Control Alphabetical orderInput Antenna Reverse Using Your Remote Control Programming the RemoteFind OUT if YOU Need to Program the Remote Inserting BatteriesHOW to Program the Remote Using Automatic Code SearchHOW to USE the Remote Control After YOU’VE Programmed IT Using Direct EntryProgrammable Codes for the Remote Control VCRSatellite Receiver Audio This page intentionally left blank Menu System Getting around the Menu SystemPower VolumeBasic Operations MuteON-SCREEN Menu Operation Navigating the MenusSetting the Picture Mode Picture Quality MenuAdjusting the Picture Settings in Memory Mode Setting the Color Temperature Reducing Noise in the Picture Audio Menu Menu OperationsScreen Menu Selecting a Viewing SizeAdjusting the Picture Position and Size Auto PictureON-SCREEN Displays Adjusting the Position of the Menu DisplayFunction Menu Saver Standby Setting the Power Saver for Computer ImagesPower Setting the Gray Level for the Sides of the Screen Setting the Brightness Level withAdjusting for Flickering with Film Mode Resetting to Default ValuesRGB1 AUDIO1 Video Inputs Audio Component Inputs AUDIO3 Setting the Audio InputsSetting the BNC Connectors Setting a Computer Image to the Correct RGB Select Mode VideoAdjusting the Display in RGB3 Input Mode Selecting the Language for the Menus Confirming the Frequencies and Polarities of Input SignalsSetting the Video Signal Format Autotuning Menu Autotuning the Component Buttons on the Remote ControlTo Check the Remaining Time Setting the Sleep TimerCancelling the Sleep Timer Reference Technical InformationInstalling the Cinema Screen Monitor Ventilation Requirements for Enclosure MountingConnecting Your PC or Macintosh Computer Mini D-SUB 15 PIN VGA Signal CompositionSpecifications DVD/HD/DTVTroubleshooting Symptom Possible Problem SolutionsCinema Screen Monitor Menu System Main menu Sub menu FunctionsOption Audio Input Supported Resolution RCA Cinema Screen Display Limited Warranty Cinema Screen Display Accessories Index Treble