Brightness:25
5 After adjusting, press ENTER to return to the Picture Setting menu. Then continue to adjust the other items.
| ◀ | ▶ |
Brightness | decrease | increase |
| brightness | brightness |
Contrast | decrease | increase |
| contrast | contrast |
Sharpness | makes picture | makes picture |
| softer | clearer |
Color | be pale color | be brilliant color |
Tint | be reddish color | be greenish |
|
| color |
6 After your desired setting, press EXIT/CANCEL to return to the normal screen.
NOTE:
• The Contrast default setting is set to maximum at the factory.
Selecting the color temperature
1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
2 Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
3 Press ▲ or ▼ to select “Picture Setting”, then press ▶ or ENTER.
The Picture Setting menu will appear.
4 Press ▲ or ▼ to select “Color Temperature”, then press ◀ or ▶ to change the setting.
Picture Setting
Brightness 25
Contrast 50
Sharpness 25
Color 25
Tint0
| Color Temperature | Cool |
| ||
| Backlight | 15 |
|
|
|
| : Select | : Adjust |
|
|
|
|
|
| |||
Setting |
| Picture Quality | |||
Cool |
| Bluish | |||
Standard | Neutral | ||||
Warm |
| Reddish |
5 Press EXIT/CANCEL to return to the normal screen.
Setting the picture size
You can view 480i and 480p format programs in a variety of picture sizes— Natural, Cinema Wide1, Cinema Wide2, Cinema Wide 3, Full and Native.
Selecting the picture size
1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
2 Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
3 Press ▲ or ▼ to select “Picture Size”, then press ▶ or ENTER to display Picture Size menu. Press ▲/▼ or corresponding Number buttons
Picture Size
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
NOTE:
• Selectable picture sizes may vary depending on the input source or broadcast signal.
• Picture Size menu also can be displayed by pressing SCREEN SIZE on the remote control.
4 Press EXIT/CANCEL to return to the normal screen.
Natural
In some cases, this image will display the size of standard 4:3 with a black side bar.
Cinema Wide1 (for 4:3 format programs) To fill the screen, the right and left edges are extended,
however; the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
Cinema Wide2 (for letter box programs with subtitles)
To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.
The top and bottom edges of the picture may be hidden.
22
52K0101A_eng.indd 22
3/12/09 3:10:56 PM