Panasonic WJ-ND300A operating instructions Playback after Selecting a Disk, Step

Playback after Selecting a Disk

Images from cameras will be recorded on the built-in hard disk drive of this unit.

Select a disk and play images as follows.

The following disks can be selected.

•HDD normal recording area/event recording area: Recording area in the built-in hard disk of this unit. Recorded images by manual recording (page 10), event recording or SD memory data will be stored in this area.

•HDD copy area: Copy area in the built-in hard disk of this unit. Recorded images will be copied in this area. (page 31)

Built-in hard disk (HDD)

Recording area for manual recording/schedule recording/

SD memory data

Normal recording area

Recording area for event recording

Event recording area

Recording area for copying

Copy area

Notes:

•The built-in hard disk or the built-in hard disk in an extension unit is described as "disk" in these operating instructions.

•Playback is also available during recording.

•The capacity of each recording area will be different depending on the settings. Refer to a system administrator for further information.

Screenshot 1

Click the [Disk Select] button in the [Search] box of the [Control] tab. The disk select window is displayed.

Step 1

Check the radio button of the desired disk to be played.

Step 2

Click the [OK] button.

Note:

It is impossible to select the HDD copy area in the following cases (the pop-up window will be dis- played):

•When the selected area has been selected by another user

•When copying is being performed manually

•When playing images

16