Panasonic WJ-ND300A operating instructions Copying Duplicate

Copying (Duplicate)

Images recorded on the normal area/event area can be copied manually onto the copy area of the hard disk drive. It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the hard disk. Manual copy is available during the following.

•While displaying live images

•While playback or pausing playback of recorded images

Screenshot 1

Display the [Control] tab.

Screenshot 2

The "Data Copy" window will be displayed.

Step 1

Click the button in the [Copy] box of the [Control] tab.

Note:

It is impossible to copy recorded images in the fol- lowing cases.

(The pop-up window will be displayed when the but- ton in the [Copy] box is clicked.)

•When copying is being performed

•When a download is being performed (page 41)

•When "COPY AREA" is selected for "Disk Select"

Notes:

•It is possible to cancel copying using the copy can- cel window that can be displayed by clicking the but- ton in the [Copy] box during copying.

•Copying may start from a point several seconds later than the designated start time when copying MPEG- 4 images.

•SD memory data of the selected camera channel and time range will also be copied onto the copy area.

Step 2

Click to select the desired camera channel to be copied. It is possible to select two or more camera channels.

Step 3

Select a start time and an end time for copying by click- ing the [i] button.

Step 4

Determine which camera channel is to be used as a standard time zone when searching.

(It is necessary to determine the primary time and date by selecting a camera channel when cameras are installed in two or more countries.)

31