Option 2: Your TV has Audio/Video jacks (red, white & yellow connectors) | EN | ||||||
|
|
|
|
|
| Connect your existing antenna cable to the | |
|
|
|
|
| 1 |
| |
TV |
|
|
|
| ANTENNA IN jack of the Converter Box. |
| |
|
|
|
|
|
|
| |
|
|
|
| AC120V |
| Connect the Audio/Video cables (not supplied) |
|
|
|
|
| 60Hz | 2 |
| |
|
|
|
| from the Audio/Video OUT jacks (yellow, |
| ||
|
| AUDIO IN |
|
| |||
| VIDEO IN | L | R | 3 |
| white, red) of the Converter Box to the |
|
|
|
|
|
|
| ||
|
|
|
|
|
| Audio/Video IN jacks on the TV set. |
|
| 2 |
|
|
|
| If there are more than two sets of Audio/ |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Video jacks on the TV set, connect only |
|
| OUTPUT CH3 CH4 |
|
| AC~120V |
| either AV1 or AV2 input jacks to those of |
|
ANTENNA IN | VIDEO | L AUDIO R |
| the Converter Box. |
| ||
| TO TV |
|
| SMART ANTENNA IN |
|
| |
|
|
|
|
|
|
| |
1 | Back of the RCA converter box |
|
|
| |||
From antenna |
| 3 | Connect the AC power cable of the |
| |||
|
|
| |||||
|
| Converter Box to a suitable wall outlet. |
| ||||
Option 3: You also need to connect your VCR
TV
ANTENNA | 3 |
|
|
|
|
| 4 |
|
|
| AC120V |
|
|
|
|
| |
|
|
|
| VCR | 60Hz |
ANTENNA OUT |
|
|
|
| |
ANTENNA IN | CH4 CH3 |
|
|
|
|
2 | 5 |
| 6 |
| |
ANTENNA IN | OUTPUT CH3 | CH4 VIDEO | L AUDIO R | SMART ANTENNA IN | AC~120V |
| TO TV |
|
|
| |
Back of the RCA converter box
1
From antenna
The SMART ANTENNA IN jacks let you connect a Smart Antenna. Refer to the antenna’s user manual for proper connection.
1Connect your existing antenna cable to the ANTENNA IN jack of the Converter Box.
Connect the RF coaxial cable* (supplied) from
2the OUTPUT TO TV jack of the Converter Box to the ANTENNA IN jack of the VCR.
Connect an RF coaxial cable* (not supplied)
3from the ANTENNA OUT jack of the VCR to the ANTENNA IN jack of the TV set.
4Slide the CH3/CH4 selector on the back of the VCR to the channel that is not in use in your area. The VCR will send its video signal to Channel 3 or 4 on your TV.
5Slide the CH3/CH4 selector on the back of the Converter Box to the channel that the VCR is not using; e.g., if you set the VCR selector to CH3, slide the Converter Box selector to CH4.
6Connect the AC power cable of the Converter Box to a suitable wall outlet.
*You can also use Audio/Video cables (similar to option 2) if the connection jacks are available on the VCR and TV.
5 | |
|
17/01/2008