Panasonic DMR-EZ49VEB manual On the TV

Page 81

On the Unit’s Display (Continued)

F74

F75

U59

U61

U76

U80, U81, U99

U88

X HOLD

≥The HDMI connection could not be authenticated due to a transfer malfunction. If you have another HDMI cable, try to use it. If it remains displayed, consult the dealer where the unit was purchased.

≥The HDMI connection could not be authenticated due to an internal data malfunction. If you have another HDMI cable, try to use it. If it remains displayed, consult the dealer where the unit was purchased.

≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit.

≥(When a disc is not inserted) Displays when a malfunction has occurred. This is displayed when the unit is in the recovery process to return to normal operation. Once the display disappears you can use the unit again.

If it remains displayed, consult the dealer where the unit was purchased.

≥HDMI cannot be output because this unit is connected to a model that does not support copyright protection.

≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Press [Í/I] on the main unit again to turn the unit on.

≥There was something unusual detected with the disc while recording, playing or copying; there was a power failure or the AC mains lead was disconnected while the unit was on. The unit is carrying out its recovery process. This process restores the unit to normal operation. Wait until the message disappears.

If it remains displayed, consult the dealer where the unit was purchased.

≥The Child Lock function is activated.

Press and hold [OK] and [RETURN ] at the same time until “X HOLD” disappears. (> 74)

On the TV

Cannot finish recording completely.

≥ The programme was copy-protected.

Copy-protect signal was detected.

 

 

 

Disc is full, or maximum number of titles

≥ The disc may be full.

are recorded.

≥ The maximum number of title has been exceeded. (> 28)

Cannot finish recording completely.

≥ [RAM] [-RW‹V›] [+RW] Create space by erasing unwanted titles.

 

Even if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL

Cannot record.

there is no increase in disc space. Available recording space on a DVD-RW

Maximum number of titles exceeded.

(DVD-Video format) or +RW disc increases when the last title is deleted (space

 

may increase slightly when you delete other titles). (> 26, 50, 64)

 

≥ Use a new disc.

 

 

No cassette.

≥ There is no video cassette in the tape deck when playing or recording TV

 

programmes. Insert a video cassette. (> 7)

The cassette is write-protected.

≥ A video cassette without a secure accidental erasure prevention tab is inserted

 

when recording programmes. Use a video cassette with a secure accidental

 

erasure prevention tab. (> 7)

 

 

Cannot playback.

≥ You tried to play a title recorded using a different encoding system from that of

TV system is different from the setting.

the TV system currently selected on the unit.

To playback, please change the TV System

Alter the “TV System” setting on this unit to suit. (> 70)

in Setup.

 

 

 

Cannot play on this unit.

≥ You tried to play a non-compatible image. (> 18)

 

 

No Disc

≥ The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.

 

≥ Ensure the disc is flat in the tray.

Now recording on DVD.

≥ The VHS plays back while recording on DVD. You can watch the VHS playback

To watch pictures on VHS, use AV1 socket,

by connecting 21-pin Scart cable from AV1 on the unit to the television.

and switch to an appropriate AV channel

VHS cannot be output via “DVD priority out” while recording to DVD. (> 75)

on your TV.

 

This is a non-recordable disc.

≥ The disc may be dirty or scratched. (> 7)

 

≥ The unit cannot record on the disc you inserted. Insert a DVD-RAM or

Unable to format.

unfinalised DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, R DL or

This disc is not formatted properly.

+RW disc. (> 15)

Format it using DVD Management

≥ You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.

in FUNCTION MENU.

Format the disc with the unit. (> 64)

 

 

$

≥ The operation is prohibited by the unit, disc or video cassette.

 

 

81

VQT2J51

Page 80 Page 82
Image 81
Page 80 Page 82
Contents About descriptions in these operating instructions Region number supported by this unitExample Digital Switchover Easy access to various functions≥ Connection with Hdmi terminal ≥ Deep Colour Before use How to replace the fuseTable of Contents Safety PrecautionsOther Settings Setting MenusAdvanced Editing ReferenceRemote Control Information Remote Control Information/Unit CareUsing the remote control Unit CareMedia Handling Location of Parts/Controls Remote ControlUnit’s Display Main UnitRear Panel Basic Connection Connecting to a Television onlyThis unit Pin Scart terminalWhen the unit is not to be used for a long time Connecting AC mains lead includedTo view digital satellite programmes To record digital satellite programmesThis case, make sure to switch the television input to AV Connecting with a Panasonic TV VieraDigital Satellite receiver AV2 EXT AV1TVWhen setup has completed, the confirmation screen appears Setting the Channels and ClockTo cancel Auto-Setup PreparationPress the numbered 4 to change the settingButtons to enter your choice of a Digit PIN numberDisc Handling Usable Discs for Recording and PlaybackRecording Modes and Durations Play-only Discs Discs that Cannot be PlayedTypes of disc for the type of connected TV USB memories you can use on this unit USB Memory HandlingMP3 File Information Music files and Still Pictures JpegStill Picture JPEG§2 Information RDL CD to turn the unit on  TV Watching TelevisionTo select desired channel To directly enter ChannelsTo select the DVD drive PlaybackStopping Play 2, 1 to select an item, then OKTo select the VHS drive Stopping Play Pausing PlayInsert a cassette Playing a Video CassetteRecording Television Programmes Pausing Recording Stopping RecordingInsert a disc or video cassette To start recordingWhat is FREEVIEWTM? Timer Recording4, 2, 1 to select the future programme, then OK ProgrammingPress and hold for about 3 seconds Copying Titles One Touch CopyTo copy without finalising Copying Titles VHS J DVDCopying Titles or Playlists DVD J VHS ≥When you start copying from the selected titleRAM -R -RDL -RW‹V› -RW‹VR› +R +RDL +RW VHS Preparation To copy from a finalised disc4 to select Delete, then OK 4 to select Video, then OK Deleting Titles4, 2, 1 to select the title, then Pause To select Delete, then OKCopy-once RecordingBroadcast in multi-channel sound Advanced Recording DVD Recording Modes and DurationsVHS Recording Modes and Durations Is reached Repeatedly until the desired timeTo select Yes, then OK Press and hold for about 1 second4, 2, 1 to select the title to play, then OK 4 to select Others, then OKFlexible Recording Playing while you are recordingSatellite receiver you have Recording from a Digital Satellite ReceiverConnected To select the DVD or VHS DriveRecording from an External Device 4 to select New Timer Programme, then OK Advanced Timer Recording1 to move through the items To set the items To select Stop Recording, then OKPROG/CHECK then 3, 4 to select Programme If the Overlapped Timer Recording screen appears2, 1 to make changes Then OKMake timer programming on the TV  to turn the unit off Making timer recordings on the televisionStart and end of recording is controlled by TV Using the Guide Plus+ list What is the Guide Plus+ system?Guide Plus+ system View advertisementList of categories Yellow to display4 to select Free Word Search, then OK4, 2, 1 to select the title you want to watch, then OK Advanced Disc Playback4 to select the time, then OK To fast-forward the tape. to rewind the tape Advanced Video Cassette PlaybackTwice to Jet Search forward. twice to Jet Search in reverse More secondsCH simultaneously Press and hold until the picture noise disappearsPress and hold until the shaking stops Press and hold for about 5 or More secondsPlaying Music files and Still Pictures Jpeg 2, 1 to select an album Show Album View screen2, 1 to select Set, then Playing still pictures4 to select Rotate Right or Rotate LEFT, then OK To select Zoom in, then OK2, 1 to select the picture 4 to select Properties, thenFunction Menu Display Convenient FunctionsWith the unit stopped Change which drive is usedWhat is Q Link? QLink What is Viera Link Hdavi Control? VIERALinkPress and hold ¥ Direct TV REC for 1 second ≥This unit supports Hdavi Control 5 functionEasy control only with Viera remote control To show the screen information Information Messages4 to select Audio Description, then OK 4 to select Audio Description 1 to select Auto, then ReturnTo change the category Entering TextStatus Several times to cycle through available displays Entering textTitles-Editing Accessing the Title ViewTitle Operations Refer to Title Operations rightPartial Delete Set up Protection/Cancel Protection RAM +R +RDL +RWPress 1 Play to start play Press OK at the point you want to use asAccessing the Chapter View Chapters-Creating and EditingChapter Operations Creating, Editing and Playing Playlists Accessing the Playlist ViewCreating Playlists Editing Playlists/ChaptersEdit Chapter ViewChapter Operations Accessing the Album still picture/Picture View Still Pictures-EditingAlbum still picture/Picture Operations Set up Protection/Cancel Protection Deleting still pictures using Delete NavigatorProperties RAM -R -RDL CD USB 5a Press 3, 4, 2, 1 to select the item, then press Delete ¢Copying Titles VHS DVD Copying Titles or PlaylistsCancel all registered copying setting and lists Copying Titles or Playlists DVD VHSRegister titles and playlists for copy Copying list icons and functions When the top menu is displayedDVD-V VHS Press 3, 4, 2, 1 to select the title you want to startRAM RAM Copying Still PicturesMenu is automatically displayed Register still pictures for copyTo select another folder Press and hold Return for 3 secondsAccessing the On-Screen Display Setting On-Screen DisplayPlayback NR Picture Menu RAM -R -RDL -RW‹V› +R +RDL +RW DVD-V -RW‹VR›Copy NR Sound MenuDVD Management Accessing the Management MenusCreate Top Menu +RW Finalising RDL -RW‹V› +R +RDLSetup Menu Channel SettingsAccessing the Setup Menu DVB Manual Tuning DVB Auto Setup by Signal Quality DVB Auto Setup by RegionSignal Condition Signal StrengthPlayback/Recording and Picture Settings Sound and Display Settings Connection Settings VHS Settings System Settings Software Update in Standby System UpdateSoftware Update Search Now Default SettingsOther Settings Using the Unit’s Remote Control to Operate the TVChild Lock Additional Connections Using an Optical Digital Audio Cable not included Using an Audio Cable not includedAdding an Amplifer or Receiver Insert fully with this side up Do not bend cable sharplyReceiver Setup Frequently Asked QuestionsDiscs Guide Plus+Mpeg PCM What can or cannot be done using the USB port on this unit?On the Unit’s Display MessagesOn the TV To Reset This Unit Troubleshooting GuideGeneral Issues Displays General Issues PowerGeneral Issues General Issues OperationGeneral Issues DVB-T Playback Issues Picture General Issues USBPlayback Issues Operation Playback Issues SoundPlayback Issues VHS Picture Playback Issues MusicPlayback Issues VHS Sound Playback Issues VHS PlayRecording Issues VHS Recording Copying, deleting, and setting protection takes a long time Editing IssuesCannot format Cannot delete chaptersDVD-R SL SpecificationsGlossary Protection Signal QualitySampling frequency ThumbnailThis Unit is Intended for USE in Moderate Climates For business users in the European Union Index
Top Page Image Contents