Panasonic DMR-EZ49VEB manual Recording Television Programmes, Insert a disc or video cassette

Recording Television Programmes

Refer to “Notes for Recording” (> 27) and “Advanced Recording” (> 28– 30) for detail information on recording.

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]

Preparation:

≥Turn on the television and select the appropriate video input to suit the connections to this unit.

≥[RAM] If the disc is protected, release protection (> 64).

≥[VHS] Ensure accidental erasure tab is intact.

1 to turn the unit on.

2	DRIVE	to select the drive (DVD or VHS).
	SELECT

3Insert a disc or video cassette.

–Insert a disc or video cassette with enough remaining blank space (> 7).

–When the format confirmation screen is displayed (> 29).

4

CH

to select desired channel.

–To select with the numbered buttons (> 19).

–When no channel setting is performed on the unit and broadcast is recorded directly from the digital satellite receiver, select a channel on the connected equipment, then press

[INPUT SELECT] to select “AV2”.

 TV

DRIVE		VOL		CH
SELECT	AV
			TRACKING/V-LOCK/PAGE
1	2	3		CH

45 6

78 9 PROG/CHECK

DELETE 0 INPUT CHAPTER

SELECT

RESET SLOW/SEARCH

SKIP/INDEXREW FF

STOP PAUSE PLAY

STATUSEXIT

				I
			U D		E
			G
			R		U
	T	O			F
					C
A					N
G					O
I
V					T
A					I
					N
N				OK	M
C
T					E
E
I					N
D					U
R

OPTIONRETURN

MANUAL SKIP
-10s	+60s

5

6

REC MODE e.g.,

to select the recording mode. (> 28)

REC

to start recording.

REC

Recording Mode

Rec Mode	Remain
XP	0:16
SP	0:32
LP	1:05
EP	2:11
SELECT

REC	REC MODE	EXT LINK	DIRECT TV REC
TEXT	STTL	DISPLAY	TIME SLIP
			JET REW

Notes

≥[RAM] [-RW‹V›] [+R] [+R]DL] [+RW] To use

a new disc, formatting is necessary.

(> 29, 64)

≥[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

It takes about 30 seconds for the unit

to complete recording management

information after recording finishes.

≥You cannot change the channel or

recording mode during recording.

	Elapsed recording time
Pausing Recording	Stopping Recording
Press [;].	Press [∫].

–Press again to restart recording. (The title is not divided.)

Tips

≥If a programme to record has subtitles, Audio Description or multiple audio, you can record with these items. They cannot be switched after recording.

–To record with subtitles

Before starting the recording, show the subtitles (> 48). If the programme has multiple subtitle, select the desired language (> 67).

–To record with Audio Description

Before starting the recording, turn on the Audio Description and set the volume (> 48).

–To record with the selected audio

Before starting the recording, select the desired audio channel or language, if the programme has multiple audio channel or language (> 63, 67).

≥(Except for [VHS] )To record sound using LPCM (XP mode only):

Set the “Audio Mode for XP Recording” to “LPCM” in the Setup menu (> 69)

22

≥This unit cannot record NTSC signals

to discs that already have PAL signal

recordings.

≥Depending on the type of disc used for

recording or the type of broadcast,

there may be restrictions on the title

you are trying to record. (> 27)

≥[VHS]

– Even if the video cassette is labelled

“S-VHS”, it is not possible to record

in the S-VHS system with this unit.

This unit records in the normal VHS

system.

– When recording is paused for

5 minutes or more, the unit returns

to stop.

VQT2J51