Connections
Cable cover removal and fitting
Removal
21.Disengage the claws at the
1uppermost end.
2.Slowly pull out in the upward direction.
Fitting
2 1.Insert the claws (at 2 points) at the bottom.
2.Push in the TOP.
1
Note: Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be routed through the antenna cover.
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
DC IN | 15V | ANT |
(M3 plug)
(Optional)
Use Volume Up or Down button to control volume level. (See page 15)
12