Panasonic TC-14LA1 Connections, Antenna cover removal and fitting, Antenna / Cable Connection

Connections

Connecting the Antenna Cable to the Antenna Terminal

Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV.

VHF Antenna UHF Antenna

Mixer

75 Ohm

Coaxial Cable

Antenna Terminal

ANT (ANT or VHF/UHF)

Coaxial Antenna Plug

Antenna cover removal and fitting

TC-14LA1/ TC-17LA1

TC-20LA1

Removal

1

2

Fitting

1

2

1.Grasp the cover at the bottom end and initially remove by pulling slightly toward yourself.

2.Slowly pull out in the downward direction.

1.Insert the claws (at 4 points) at the top end.

2.Push the claws in (at 4 points) at the bottom end.

Removal		1.Grasp the opening and initially
		pull the cover slightly towards
		yourself to disengage the
		claws (at 2 points on both the
1	2	left and right).
		2.Slowly pull out in the
		downward direction.
Fitting		1.Insert the claws (at 4
		points) at the top end.
1		2.Push the claws in (at 4
		points) at the bottom

end. 2

Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.

Antenna / Cable Connection

Incoming 75 Ohm Cable from Home Antenna / Cable Company

F-Type Antenna Adapter (not supplied)

ANT (VHF/UHF)

on the Back of the TV

Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)

Note:

Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.

8