Basic Controls
<Top Side Controls>
POWER | TV/VIDEO | VOLUME | CHANNEL |
TV/VIDEO button
Volume Up/Down
Channel Up/Down
Main POWER switch
First press the POWER switch to turn the set on.
Remote control sensor
Operate your Remote control pointed to the Remote control sensor (Within about 6 meters in front of the TV set.)
Power button
Press to turn this set ON or OFF. (See page 13)
Note:
The LCD TV’s power cord must first be plugged into the wall outlet and then turned on at the Main POWER switch.
Changes to the next channel up Moves cursor upward during menu mode.
Reduces volume | Increases volume |
Moves cursor to | Moves cursor to |
the left during | the right during |
menu mode. | menu mode. |
Changes to the next channel down
Moves cursor downward during menu mode.
MENU button
Press to display | MENU |
ADJUST SET UP | |
MENU screen, | PICTURE |
PICTURE ADJUST | |
press again to | AUDIO |
AUDIO ADJUST | |
clear. |
|
|
Direct program number Selection buttons
Switches to previously viewed channel or video mode.
ASPECT button
4 : 316 : 9
TV/VIDEO button | MUTE button |
The input mode | Press to mute the sound. |
changes each time | Press again to reactivate sound. |
this button is pressed. | Sound is also reactivated when |
| power is turned off or volume level |
| is changed. |
RETURN button
Press to return to the previous screen.
RECALL button
Press to display time, channel, sleep timer and other options.
SAP button
Selects Audio mode (See page 21).
STEREO SAP MONO
SLEEP button
The LCD TV may be preset to switch to
30 | 60 | 90 |
| 0 |
|
When 3 minutes remain, “ | 3 ” will |
flash. The SLEEP timer is cancelled if a power interruption occurs. Before the timer automatically turns the power off, the remaining time will blink on the screen (“3” for 3 minutes, “2” for 2 minutes and “1” for 1 minute before the power goes off).
15