TUNING MENU
AUTO TUNE
Before AUTO TUNE, set the “CH SELECT” and “SYS SELECT”.
Follow the step on the previous page to display the TUNING MENU screen.
1 | Press to select AUTO TUNE. |
Press to access AUTO TUNE.
Notes:
•If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV's memory will be wiped out so that the new settings can be stored).
•If you exit the procedure after this point and before AUTO TUNE is complete, no station information will be stored. Restart and complete the AUTO TUNE procedure so that the TV is
2 | Press to start AUTO TUNE. |
TUNING MENU 
CH SELECT | DIRECT |
SYS SELECT | ASIA/M. EAST |
AUTO TUNE | ACCESS |
MANUAL TUNE |
|
SOUND SYS | 5.5MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
29 |
|
CH 29 |
|
AUTO SETUP IN PROGRESS | |
SEARCHING : |
|
STORED CH29 |
|
SETUP : RETURN TO TUNING MENU | |
TV/AV : TO EXIT |
|
Once this operation is completed the TV will display the program now stored on programme position 1.
TV/AV
Press at any time to go back to watching TV (please read the Note in the above procedure).
AUTO TUNE (via top panel)
It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions
1 Press F (Top panel) until Tuning mode is reached.
2Press 
or 
to access Tuning mode.
3 Press F (Top panel) to access Auto tune.
4 Press |
| STR F | TV/AV |
or | to start search. |
| |
Press F | at any time to exit the Tuning menu. |
| |
Helpful Hint
1.If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour System” selection on page 15.
2.After the Automatic tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the Programme SKIP function on page 15.
16