Panasonic TX-20LA1X, TC-20LA1H Antenna cover removal and fitting, Cable cover removal and fitting

Before Operating This Set

Antenna cover removal and fitting

TX-17LA1, TC-17LA1

TX-20LA1, TC-20LA1

Removal

	1.	Grasp the cover at the
		bottom end and initially
1		remove by pulling slightly
		toward yourself.
2
	2.	Slowly pull out in the
		downward direction.

Removal

1 2

1.Grasp the opening and initially pull the cover slightly towards yourself to disengage the claws (at 2 points on both the left and right).

2.Slowly pull out in the downward direction.

Fitting

1

2

1.Insert the claws (at 4 points) at the top end.

2.Push it until click.

Fitting

1

2

1.Insert the claws (at 4 points) at the top end.

2.Push it until click.

Cable cover removal and fitting

Removal Fitting

1	2	1.	Disengage the claws at the
			uppermost end.
		2.	Slowly pull out in the upward
			direction.

Note:

1. Insert the claws (at 2 points) at

2	the bottom.
	2. Push it until click.

1

Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be routed through the antenna cover.

6