Panasonic TX-20LA1Z, TC-20LA1H, TC-17LA1H, TX-17LA1Z, TX-17LA1M, TX-17LA1X TV Games / Home Computers

Page 3

Warnings and Precautions

• This TV set is designed to operate on DC 15V.

• To prevent damage which might result in electric shock or fire, do not

expose this TV set to rain or excessive moisture.

This TV must not be exposed to dripping or

splashing water, and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

• DO NOT use this unit near water. (Near a bath tub, etc.)

• Unplug the power cord in

the event of any malfunction

(screen goes blank, no sound, odd sounds, smoke

or unusual odours coming from the unit).

Unplug the power cord if

foreign matter or water falls into the unit, or if the unit is dropped or the cabinet is damaged.

• TAKE CARE NOT to damage the power cord.

• DO NOT touch the aerial cable and this unit when there is lightning.

• DO NOT use if the power cord or power plug is damaged, or if the plug does not fit tightly into the socket.

• DO NOT use at a voltage other than indicated.

• DO NOT touch the power plug if your hands are wet.

• Turn the power “Off” before connecting other electrical equipment.

• Ask your sales outlet to install the aerial.

WARNING : HIGH VOLTAGE!!!

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.

TV Games / Home Computers

Extended use of TV games or home computers with any television set can cause a permanent ‘shadow’ on the screen. This type of irreversible LCD panel damage, can be limited by observing the following points:

Reduce the brightness and contrast levels to a minimum viewing level.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after- image to remain on the LCD TV screen.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 16:9 mode.

This type of LCD panel damage, is not an operating defect, and as such is not covered by the Panasonic warranty.

The On/Off switch on this model does not fully

disconnect the TV from the mains supply. Remove the mains plug

from the wall socket

before connecting or disconnecting any leads,

or if the TV set is not used for a prolonged period of

time.

Note:

If the set is not switched off when the TV station stops transmitting, it will automatically go to stand-by mode after 30 minutes. This function will not operate when the TV is in AV mode.

3

Image 3
Contents Operating Instructions Dear Panasonic Customer Table of ContentsTV Games / Home Computers Optional External Equipment How to use the LCD standCabinet and LCD panel care Remove the mains plug Preparation Receiver LocationCheck the accessories before installations Supplied AccessoriesFitting remote control batteries Battery cautionsCable cover removal and fitting Antenna cover removal and fittingMain Power switch Quick Start GuideImportant Notes Connections How to connect the input terminalsConnect headphones / earphones as follows Connecting Headphones / EarphonesPicture Top panel controls and Remote controlSetup Menu Basic controlsCH Select = Direct CH Select = PositionPress to display Sound screen Using the On Screen DisplaysPress to display Picture screen Press to display Setup Menu ScreenPress to adjust the desired setting Tuning menuPress to display the setup menu screen Press to select the menu to adjustPosition Select Channel SelectionSelect the most easily viewed channel selection method Example Programme Channel ReceivedManual Tune CH SelectSYS Select Auto TunePress to select Auto Tune To start search Press F At any time to exit the Tuning menuAuto Tune via top panel Helpful HintPress to search the higher or lower channel Press to access Manual TuneManual Tune via top panel Press to select Manual TuneBacklight MenuDynamic StandardHelpful Hint Normalization Stereo Bilingual Sound Selection VOLUME, BASS, TREBLE, BALANCE, Headphone VOLAuto Mode Picture ExplanationAspect Controls Aspect buttonAdvanced Remote Control Operation List Store Update DisplayUpdate Index When in Top operationVCR / DVD Operation Manufacturer setting Receive Channel Channel AllocationTo clean this unit, wipe with a soft, dry cloth TroubleshootingMaintenance Symptoms Checks Picture SoundModel NumberSerial Number Customer’ Record