Panasonic PT-61LCZ70-K, PT-50LCZ70-K, PT-56LCZ70-K manual Manual program setting

6.Press ▲▼ to select “ANT in”.

7.Press ◄► to select “Antenna” or “Cable”.

Program channel

ANT in
	Cable
Auto
Manual
Signal meter

8.Press ▲▼ to select “Auto”.

9.Press OK to display the Auto program menu.

Program channel

ANT in
	Cable
Auto
Manual
Signal meter

10.Press ▲▼ to select “All channels”, “Analog only”, or “Digital only”.

11.Press OK to start scan.

Auto program

All channels

Analog only

Digital only

Auto program

Scanning digital channel

Progress

Quit40%

12.After Auto program is complete, the unit will return to Manual program mode. To place the channels that were located by auto scan in memory, move the cursor to “Apply” and press OK. (p. 27-28)

If OK is not pressed after selecting APPLY, the channels will not be memorized.

Notes

•Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted manually using the “Manual program setting”. (p. 27-28)

•“Auto program” must be done when you select the input signal for the first time or whenever you change the antenna configuration.

Manual program setting

Use this procedure when changing setting of receiving channels or changing the channel display. Also, use to add or delete channels from channel list manually.

Procedure

1.Press MENU to display the Main Menu screen.

2.Press ▲▼ to select “Setup” icon.

3.Press OK to display the Setup menu.

Menu

EZ Sync

Picture

Audio

Timer

Lock

Memory card

Setup

4.Press ▲▼ to select “Program channel”.

5.Press OK to display the Program channel menu.

•If Lock (p. 41) has been set, you must enter your password to display the Program channel menu.

Setup1/2

Surf mode

All

Language

Program channel

External devices

CC

EZ Sync setting

6.Press ▲▼ to select “Manual”.

7.Press OK to enter the Manual program screen.

Program channel

ANT in	Cable
Auto
Manual
Signal meter

Basic Operation

27