Panasonic VP-31GN manual Option

Settings Using the On-Screen Display

OPTION

AV 0 -/- -

INDEX/SKIP SLOW/SEARCH

Press [34] to select the item and press [2 1] to change the setting.

	NAVI			MENU		OPTION		1/2	OPTION		2/2
	TOP MENU				MENU
						TAPE SELECT		[AUTO]	DUBBING NORMAL AUDIO		[L]
	DIRECT			PLAY
						NTSC INPUT SELECT		[AUTO]
	NAVIGATOR			LIST
						NTSC PB SELECT		[onPALTV]
ENTER		ENTER				JET NAVIGATOR		[OFF]
						DELETE NAVIDATA		[NO]
DISPLAY						OSD REC		[OFF]
						OSD		[AUTO]
	DISPLAY			RETURN		OUT[VHS/DVD]		[AUTO]
	PROG/CHECK	TIMER	PROG PLAY	JET REW		SELECT:	END :MENU		SELECT:	END :MENU
CANCEL/	CANCEL/RESET	SUBTITLE	AUDIO	ANGLE/PAGE
					AUDIO
RESET
	MUSIC w/ PICTURE A.SRD		CINEMA POSITION MEMORY
						¬ To exit the settings screen

PICTURE	SPEED	INPUT SELECT
PLAY MODE REPEAT	ZOOM	SETUP

Press [MENU] twice.

Items	Settings (Underlined items are the initial setting.)
TAPE SELECT	AUTO:	E30, E60, E90, E120, E180 and E240 tapes
Set the length of tape you are using so the unit can show the correct	E195:	E195 tapes
remaining time (lpage 25).	E260:	E260 tapes
	E300:	E300 tapes
NTSC INPUT SELECT	AUTO:	NTSC [4.43] and [3.58] signals
Select the colour TV system used to record NTSC signals.	≥If the tape has not recorded correctly, select 4.43 or 3.58.
	4.43:	NTSC 4.43 signals
	3.58:	NTSC 3.58 signals
	≥Some programmes on NTSC 3.58 system cannot be recorded
	correctly at this position.
NTSC PB SELECT	on PAL TV: TVs that can receive PAL signals
Select the colour TV system of the TV used to play back a tape	4.43:	TVs that can receive NTSC 4.43 signals
recording NTSC signals.	3.58:	TVs that can receive NTSC 3.58 signals
JET NAVIGATOR (lpage 20)	ON:	Jet Navigator data automatically registered.
	OFF:	Data not registered.
	≥If you select “ON”, “OSD REC” is set to “OFF” automatically.
DELETE NAVIDATA	NO
See page 20 to delete data on a single tape.	ENTER:	If you choose this position, press [ENTER] to delete
		all the Jet Navigator data.
OSD REC	ON
You can record the present date and time on the same screen	OFF
which the picture is recorded.	≥If you select “ON”, “JET NAVIGATOR” is set to “OFF”
	automatically.
OSD (lpage 25)	AUTO:	Messages appear on the TV for about 5 seconds
		when you press [DISPLAY].
	OFF:	Messages do not appear.
OUT [VHS/DVD] (lpage 12)	VHS:	Only VHS outputs.
You can set the unit so that the output is automatically switched to	MANUAL:	VHS output and DVD output are manually switched.
the device which starts playback.	AUTO:	VHS and DVD are automatically switched depending
		on the manipulation or the unit operation.
DUBBING NORMAL AUDIO (lpage 42)	L:	To record the sound from left channel
Select the audio channel to be recorded on the Normal audio track	R:	To record the sound from right channel
when dubbing a bilingual DVD.

24