Panasonic VP-31GN manual Picture Mode, Adjusting the playback picture, Ntsc Playback

Page 15

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repeat Playback

Beginning of Tape

End of Recorded Part

 

 

 

At the end of the programme, the tape rewinds to the beginning of the programme and plays it

 

 

 

 

 

 

 

again (It only works if there is at least 5 seconds blank at the end of the programme). This

Repeat Playback

 

 

 

 

 

 

PLAY

 

 

 

 

 

 

repeats until you cancel it.

Control signal

 

 

 

 

 

 

 

 

 

Interruption

 

 

 

 

REW

(at least 5 sec.)

 

 

 

 

 

 

 

 

 

 

Picture Mode

This function reproduces optimum playback picture from various kind of recorded tapes and contents.

..............................................................................................................................................................................................................................................................................................................................

Press [PICTURE].

Each time you press the button, the indication changes in the following order:

[# STANDARD: Normal mode for recorded TV programmes (Initial Setting)

l;

lDYNAMIC: Clear & vivid images (e.g. for scenery and sports)

l;

lSOFT: Mild images (e.g. for rental software)

l;

{= CARTOON: Delicate images for cartoon

STANDARD

Adjusting the playback picture

Manual tracking

The unit usually makes tracking adjustments, but you may need to do it manually, if noise appears on a tape recorded on other equipment.

..............................................................................................................................................................................................................................................................................................................................

During play, press [TRACKING/V-LOCK] I or J.

Repeat until the noise disappears.

Vertical locking adjustment

Adjust the vertical to stop the picture jiggling while paused.

..............................................................................................................................................................................................................................................................................................................................

While paused, press [TRACKING/V-LOCK] I or J.

Repeat until the jiggling stops.

¬To return to auto tracking

Press both [TRACKING/V-LOCK]I and J simultaneously.

¬To remove the noise from a paused picture Start slow play, then adjust the tracking.

Notes:

This may not work with some TV models and tapes.

You can also adjust the tracking and vertical with [CH]IJ on the unit.

NTSC Playback

Tapes recorded in the NTSC system can be played back via a PAL system TV.

To record in the NTSC system, set “NTSC INPUT SELECT” (OPTION lpage 24).

Select “on PAL TV” in “NTSC PB SELECT” to view the NTSC recording in colour (OPTION lpage 24). On some TVs, the playback picture may roll up or down. If your TV has V-HOLD control or

equivalent function, use it to adjust the picture.

Note for only NTSC Playback on PAL system TV

This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images play back by this function cannot be recorded correctly on other VHS.

VHS Operations

15

Image 15
Contents DVD Player Video Cassette Recorder Contents NV-VP31GC Middle East model NV-VP31GCS Asia, Malaysia model AccessoriesFor your safety Condensation may form in the following casesVHS Deck and Cassette Tape Information Remote ControlDisc Information Control Reference Guide Main UnitUnit’s Display Control Reference Guide Remote Control For better video from DVD ConnectionsBasic Connections Audio/Video Output SocketsAnalog connection ConnectionsTo enjoy sound through other audio equipment Digital connectionCheck whether the TV can be operated properly TV Maker SettingRefer to the chart below for the code of your TV Operating the TVTo change the RF output channel Tuning the TV to Your UnitSetting Up for VHS LanguageClock SET TV Aspect DVD Quick SetupPress Enter and then Setup to end the settings Press 34 to select the item and press EnterPlayback Insert a recorded video cassette tapePress 1PLAY Ntsc Playback Picture ModeAdjusting the playback picture PlaybackPress REC¥ to start recording RecordingPress CH IJ buttons to select the TV station Press Speed to select the tape speedTape Refresh Function One-Touch Recording OTRRecording Recording from an external sourcePress PROG/CHECK Use 34 to move through the items Timer RecordingChange the settings with 2 Press TimerTo check and cancel a Timer Programme Timer RecordingPress Navi several times to select Programme Search FunctionsJet Navigator Press NaviEasy Programme Playback Search FunctionsVHS Index Search System Viss Press backward or 9 forwardTV/ 2 Press 34 to select the menu Settings Using the On-Screen DisplayTuner Preset Press 34 to select Auto Tune Press 2 1 to start Auto TuningSystem Settings Using the On-Screen DisplayOption Press Display Changing audioTo change the audio, press Audio Playing Discs-basic play Press OPEN/CLOSE to open the disc trayPlace the disc with the label facing upward Playing Discs-basic play Position Memory functionChapter Review Quick Replay Convenient FunctionsStarting play from a selected item Selecting groups to playTo repeat playing in the order programmed Convenient Functions Rotating PicturesRepeat Play During play, press RepeatChanging Play Sequence Program PlayRandom Play Playing a play list Direct Navigator34 21 to select the picture MP3/WMA, CD text and Jpeg Navigating MenusPress TOP Menu Press 34 to select the track orMP3/WMA, CD text and Jpeg Navigating Menus Playing HighMAT discsPress 342 1 to select then press Enter Press Subtitle To Enjoy Movies and Music MoreChanging soundtracks, subtitles and angles During play, press AudioVariable Zoom function To Enjoy Movies and Music MoreAdvanced Surround CinemaLbelow and press Enter Press SetupDigital output Select Audio tab with 2To change the position of the icons Using On-Screen Menu IconsPress 2 1 to select the item Change the setting with Disc informationUsing On-Screen Menu Icons Progress indicator Unit informationMarker Audio/Subtitle language Using On-Screen Menu IconsTo change the user mode Audio attributes DVD-V RAM Display onlyPress 34 to select the item Changing SettingsEntering a password Ratings Press 2 1 to select the menu’s tabChanging Settings Setup menuMenus Items Recording from DVD to VHS Manual DubbingOne-Touch Dubbing Music with Picture Adding Music to VideoBefore Requesting Service GeneralSound VHS picture Before Requesting ServiceDisc play PictureEditing Error MessagesSelf-diagnostic Indications on the unit’s display Disc picture1 ch GlossarySpecifications WMA IndexLanguage Ntsc