11.8. Disassembling the Nut Unit
1.Remove the screw.
Notes
·The nut unit is not part of the optical pickup. Before replacing the optical pickup, remove the nut unit for use with the new optical pickup.
·After installation, use screw lock to lock the screw in position.
·When reassembling, use screw lock to lock the screw in position after attaching it.
11.9.Disassembling the Sub-Shaft Preload Spring
1.Remove the screw.
Notes
·Handle the
·The
·After installation, use screw lock to lock the screw in position.
11.10. Assembling the Optical Pickup
1.Install the optical pickup.
Note
Take care not ot attach the tilt spring and guide shaft in the wrong order.
2.Insert the pickup FPC into connector FP5201 on the module P.C.B.
21