DVD-RV60
12 Electrical Adjustment
12.1. Video Output (Luminance Signal) Adjustment
Do this adjustment after replacing a P.C.B.
Measurement point | Adjustment point | Mode |
| Disc |
Video output terminal | VR3501 (mother P.C.B.) | Color bar 75% |
| |
|
| PLAY (Title |
| or |
|
| PLAY (Title |
|
|
Measuring equipment, tools | Adjustment value |
| ||
Screwdriver, Oscilloscope |
| |||
200mV/div, 10µsec/div |
|
|
|
Purpose: To maintain video signal output compatibility.
1.Connect the oscilloscope to the video output terminal and terminate at 75 ohms.
2.Adjust VR3501 so that the luminance signal (Y+S) level becomes 1000
12.2. Video Output (Chrominance Signal) Adjustment
Do this adjustment after replacing a P.C.B.
Measurement point | Adjustment point | Mode |
| Disc |
Video output terminal | VR3511 (mother P.C.B.) | Color bar 75% |
| |
|
| PLAY (Title |
| or |
|
| PLAY (Title |
| |
Measuring equipment, tools | Adjustment value |
| ||
Screwdriver,Oscilloscope |
| |||
200mV/div, 10µsec/div |
|
|
|
Purpose: To maintain video signal output compatibility.
1.Connect the oscilloscope to the video output terminal and terminate at 75 ohms.
2.Adjust VR3511 so that the chrominance signal (C) level becomes 621
26