Panasonic DVDRV60 specifications Service Mode Table, Self-Diagnosis Function UHF Display

DVD-RV60

6 Self-Diagnosis Function and Service Modes

6.1.Service Mode Table

The service modes can be activated by pressing various button combinations on the player and remote control unit.

Player buttons	Remote control unit buttons		Application		Note
	0	Displaying the UHF display F_ _ _			Refer to section 6.2, Self-
					Diagnosis Function (UHF
					Display).
	5	Jitter check, Tilt adjustment			Refer to section 11.12,
		*Display shows JITXXX			Optical Pickup Tilt
		The 3 digit number (JITXXX) indicates the Jitter rate			Adjustment.
		(JIT088=8.8%)		the right of JITXXX displays
		The 3 digit number
		an error counter (increases as errors occur) but does not
		necessarily mean picture/ playback problems will occur.
		(This number is not as important as the JITXXX) Refer to
		section 11.12 for Optical Pickup Tilt Adjustment
PAUSE		Procedure
	6	Checking the region numbers and broadcast system
+
	7	Checking the program version			Check the IC6302
OPEN/CLOSE
					FLASH ROM program.
	9	Lighting Confirmation Function of Display Tube
	DISPLAY	Checking the laser drive current			Refer to section 5,
					Optical Pickup
					Self-Diagnosis and
					Replacement
	PAUSE	Writing the laser drive current value after replacing			Procedure.
		the optical pickup (do not use for anything other than
		optical pickup replacement)
PAUSE		Initializing the DVD player			Refer to section 10.1,
SKIP/SEARCH<<		(restoring factory preset settings)			Initializing the DVD
OPEN/CLOSE		*Use when replaceing a microprocessor, microprocessor			Player
		peripheral parts, or P.C.B.

6.2.Self-Diagnosis Function (UHF Display)

This unit incorporates a convenient self-diagnosis function for use in troubleshooting.

Display method		Display	Diagnosis	Checkpoints
Service numbers displayed		CHECK THE DISC	Focus error	IC2001,IC2511,IC5201,pickup
during use		H01	Tray loading error	IC2001, IC2511, loading motor
		H02	Spindle servo error	Spindle motor, IC2501, IC2001
		H03	Traverse error	Stepping motor, IC2511, IC2001
		H04	Tracking servo error	IC2001, IC2501, IC5201, pickup, disc
		H05	Seek error	Stepping motor, IC2511, IC2001
		H06	Power supply error	IC1125, IC1151, IC6001
Press the "0" button on the remote		F0**	Disc format error	If this type of error occurs, refer to section
control unit while pressing	the	F1**	Disc code error	6.3, Examples of Repairs Using Error
"PAUSE" and "OPEN/CLOSE"				Codes.
		F2**	Decoder LSI error
button on the player.
		F3**	SDRAM error
		F4**	IIC BUS error
		F5**	DSC
		F6**	ECC error
		F7**	Microprocessor error
		F8**	Microprocessor error

7