7 Service Tools and Equipment
7.1.Service Tools and Equipment Table
Application | Name | Number |
General | DVD test disc | |
Tilt adjustment | Hex wrench | JGS0100 |
| Adjustment table | VFK0539 |
Inspection | Extension cable (power supply P.C.B. to mother P.C.B.) | JGS0099 |
| Extension cable (mechanism loading P.C.B. to mother P.C.B.) | VUC8027 |
| Extension cables (module P.C.B. to mother P.C.B.) | JGS0116, JGS0098 |
Others | Screw lock | RZZ0L01 |
| Grease | JGS0091 |
|
| JGS0092 |
| Lubricant | JZS0648 |
| Grease | JGS0101 |
Confirmation | CD test disc | SZZP1054C |
| VCD test disc | PVCD_K06 |
Electrical adjustment | Oscilloscope |
|
| Probe |
|
| AV cable | VJA0658 |
| TV monitor |
|
General | General tools (Screw driver. etc) |
|
Static electricity countermeasures | Soldering iron (with ESD countermeasure) |
|
|
| |
| Conductive material (conductive sheet) |
|
7.2.Storing and Handling Test Discs
·Surface precision is vital for DVD test discs. Be sure to store and handle them carefully.
1.Do not place discs directly onto the workbench, etc., after use.
2.Handle discs carefully in order to maintain their flatness.
Place them into their case after use and store them vertically. Store discs in a cool place where they are not exposed to direct sunlight or air from air conditioners.
3.Accurate adjustment will not be possible if the disc is warped from being placed on a surface made of glass, etc. If this happens, use a new test disc to make optical adjustments.
4.If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable.
9