RQT8509 Changing the player settings, Audio tab

∫ “Audio” tab

PCM Digital Output	Up to 48 kHz: When connected to equipment compatible
Check the digital input			with 44.1 or 48 kHz
limitations of the	Up to 96 kHz: When connected to equipment compatible
equipment you			with 88.2 or 96 kHz
connect using	≥Signals from copy-protected discs are converted to 48 or
COAXIAL terminal	44.1 kHz.
and select the	≥Some equipment cannot handle sampling frequencies of
maximum sampling	88.2 kHz, even if they can handle 96 kHz. Read your
frequency of PCM	equipment’s operating instructions for details.
digital output.
Dolby Digital	Bitstream		PCM	Select “Bitstream” when the
With COAXIAL				equipment can decode the
connections				bitstream (digital form of multi-
(➜ page 7)				channel data). Otherwise,
				select “PCM”. (If the bitstream
DTS Digital	Bitstream		PCM	select “PCM”. (If the bitstream
DTS Digital	Bitstream		PCM	is output to the equipment
Surround				is output to the equipment
Surround				without a decoder, high levels
With COAXIAL				without a decoder, high levels
With COAXIAL				of noise can be output and
connections				of noise can be output and
connections				may damage your speakers
(➜ page 7)				may damage your speakers
(➜ page 7)				and hearing.)
				and hearing.)
MPEG§5 §6	PCM		Bitstream
With COAXIAL
connections
(➜ page 7)

Dynamic Range	Off
Compression	On:	Adjusts for clarity even when the volume is low through
		compressing the range of the lowest sound level and
		the highest sound level. Convenient for late night
		viewing. (Only works with Dolby Digital)

FL Dimmer	Bright	Dim
Changes the brightness	Auto: The display is dimmed, but brightens only when you
of the unit’s display.		perform some operations.
Auto Power Off	On: The unit switches to standby mode after about 30
	Off	minutes in the stop mode.
	Off
DivX Registration	You need this registration code to purchase and play DivX
Displays the unit’s	Video-on-Demand (VOD) content. (➜ page 15, About DivX
registration code.	VOD content)
QUICK SETUP	Yes	No
Re-initialise Setting	Yes: The password screen is shown if “Ratings” (➜ page 18)
This returns all	is set. Please enter the same password and press
values in the Setup	[ENTER]. After “INI” on the display disappears, turn the
menus to the default	unit off and on again.
settings.	No

§1 Language options

French, German, Italian, Spanish, Polish, Swedish and Dutch [The\Middle\East,\South\Africa\:

French, German, Italian, Spanish, Portuguese, Russian and Dutch [Asia]: Chinese

§2 The original language designated on the disc is selected. §3 Input a code number referring to the table (➜ page 20).

§4 If the language selected for “Audio” is not available, subtitles appear in that language (If available on the disc).

§5 [Continental\Europe]

§6 [The\Middle\East,\South\Africa] §7 [Asia]