Panasonic DVD-S42 Basic play 1Power on 2Open the disc tray, 3Load the disc, 4Start play, Skip

Basic play

1Power ON. 2Open the disc tray.

Stop Pause

Basic play

3Load the disc.	Remote control sensor	4Start play.
≥Load double-sided discs so the label for the side you want

to play is facing up.

≥DVD-RAM:Remove discs from their cartridges before use.

		Repeat play
1		≥Select “Repeat” (➜ page 12, Repeat play) or “A-B Repeat”
		(➜ page 16, Play Menu).
Skip		Search (during play)
≥[DVD-VR]Can also skip to the markers.
		Slow-motion(during pause)
		≥Up to 5 steps
		≥Press [1] (PLAY) to restart play.
Stop		≥[VCD] Slow-motion: forward direction only
		≥[MPEG4] [DivX] Slow-motion: Does not work.
The position is memorized when “!” flashes on the display.	4
≥Press [1] (PLAY) to resume. (Resume play)		Pause
≥Press [∫] to clear the position.
≥Even after the unit is turned off, the position is memorized		≥Press [1] (PLAY) to restart play.
(Normal playback only).

RQT8509

8

Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

Standby/on indicator (Í)

When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.

≥To play MP3, JPEG, MPEG4 or DivX video contents on DVD-RAM that contain both [DVD-VR]and another format (e.g. [JPEG]), select “Play as Data Disc” (➜ Page 17, Other Menu).

≥Discs continue to rotate while menus are displayed. Press [∫] when you finish to preserve the unit’s motor and your television screen.

≥Total title number may not be displayed properly on iR/iRW.

If you are experiencing problems, refer to troubleshooting guide (➜ page 22, 23).