Panasonic DVD-RV26, DVD-RV21 manual DD-RV21 Back of the unit Red White Optical digital, RQT5733

1

_	I_1	D_D-RV21 I	Back of the unit
		Back of the unit

J (Red) (White)

Optical digital

audiolnsert fully, wit_l this side facin

Audio cable _

up j

(Red) {White)

	Amplifier	or system component
• Select	"2-channel"(-. page 22).	Adiust the settings to suit the equipment	you have con-
eSelect	"No" in "PCM Down Conversion" (-, page 26).	nected (-, page 26).	oj

oil you connect an amplifier with a Dolby Pro Logic decoder, you will also need to connect center and surround speakers to enjoy surround sound. Read the instructions for the equipment for connection details.

eTurn Advanced Surround and Bass Plus off (-, page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surround

To enjoy Dolby Pro Logic or Bass Plus is on.

	-	-,,,	-
You can enjoy more powerful bass by connecting an active subwoofer.
				• Place the subwoofer as close as possible to the front center.
	Audio cable		)	oTurn BASS PLUS on to boost the output from the subwoofer
				(-- page 14).
				oAdjust the volume on the subwoofer to suit your preference.
To the	subwoofer's*-
input	terminal

•Analog recording

You can record to an MD or cassette tape.

Using analog connection means sound will be unaffected by the copy guards found on DVDs.

To make an analog recording

1.Connect the recording equipment with an audio cable (-,I_1 above).

2.Set "Speaker Setting" to "2-channer' (-_ page 22).

(If this is set to "Multi-channel",only the audio for the front 2 speakers will be recorded.)

•Digital recording

You can record the digitalsignal directly ontoan MD.

The signals on DVDs will be converted to 48 kHz/16 bit linear PCM. Ensure the following conditions are met.

oThere is no copy guard recorded on the disc.

eThe recording equipment can handle a sampling frequency of 48 kHz/16 bit.

To make a digital recording

1.Connect the recording equipment with an optical digital audio cable (-_ [] above).

2.When recording DVDs, change the digital audio output settings (-* page 26).

PCM Down Conversion: Yes

Dolby Digital: PCM

DTS Digital Surround: Off

RQT5733