Panasonic DVD-RV21, DVD-RV26 Changing initial setting, PCM Down Conversion, DTS Digital Surround

t Changing initial setting

Refer also to "Common procedures" (.o page 21) and the "Audio menu" section in "Summary of initial settings" (-, page 22).

&, T, <,

ENTER

I PCM Down Conversion I

No (Factory preset):

When you have connected an amplifier with audio cables.

Yes:

When you have connected an amplifier with an optical digital audio cable.

Copyright protection limits digital output to 48 kHz/t6 bit.

When playing DVDs recorded in 96 kHz

Sound is output as follows in accordance with the connections and settings you have made.

Setting

No

Yes

		Connection
		Digital		Analog
No output		(If there is no		Output	as
copyright		protection,	audio is	96 kHz
output	at	96 kHz. "_)
Converted		and output	as 48	Converted		and
kHz/16	bit			output	as	48 kHz

• _The connected equipment must be able to handle 96 kHz LPCM

order to take advantage of high quality audio found on these discs.

I Dolby Digital I

Bitstream (Factory preset):

When you have connected a unit with a built-in Dolby Digital decod- er.

PCM:

When you have connected a unit that doesn't have a built-inDolby Digital decoder. _2

DTS Digital Surround 1

Off (Factory preset):

When you have connected a unit that doesn't have a built-in DTS

decoder. "2 (No digital signal is output.) aitstream:

When you have connected a unit with a built-in DTS decoder.

•2These changes to digital audio output must be made, other- wise bitstream signals the decoder cannot handle will be

output. If these signals are output, "noise" will be output which can cause harm to your ears and speakers.