Brother 885-V31/V33 operation manual Setting the Stitch, Adjusting the stitch width

————————————————————————————————————————————————————

Setting the Stitch

This machine is preset with the default settings for the stitch width and stitch length for each stitch. However,

you can change any of the settings by pressing in the screen, then follow the procedure described in this section.

2

Note

zSettings for some stitches cannot be changed. For details, refer to "Stitch Setting Chart" (page 70).

zStitch settings return to their defaults if they are changed, when the machine is turned off or a different stitch is selected before the stitch setting is saved. If you want to save settings, refer to "Saving stitch settings" (page 64).

Adjusting the stitch width

The stitch width (zigzag width) can be adjusted to make the stitch wider or narrower.

Each press of makes the zigzag stitch narrower.

Each press of makes the zigzag stitch wider.

Memo

z means the setting cannot be adjusted.

zIf the straight stitch (left needle position or triple stretch stitch) was selected, changing the stitch width changes the needle position. Increasing

the width moves the needle to the right; reducing the width moves the needle to the left. For details, refer to "Changing the needle position" (page 79).

zPress to return the setting to its default.

zIf the foot controller is connected, the sewing speed controller can be used to adjust the zigzag width. For details, refer to "Adjusting stitch width using the sewing speed controller" (page 58).

CAUTION

zAfter adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

Setting the Stitch 57