Brother 885-V31/V33 Reinforcement Stitching, Triple stretch stitching, Bar tack stitching

————————————————————————————————————————————————————

Reinforcement Stitching

Reinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners.

			Stitch Width		Stitch Length		Presser
Stitch Name	Pattern	Application	[mm (inch)]		[mm (inch)]
							Foot
			Auto	Manual	Auto	Manual
Triple stretch	4	Reinforcing the seams of sleeves	0.0	0.0-7.0	2.5	1.5-4.0	J
stitch		and inseams	(0)	(0-1/4)	(3/32)	(1/16-3/16)
	60	Reinforcing the ends of	2.0	1.0-3.0	0.4	0.3-1.0
Bar tack stitch		openings, such as the corners of
			(1/16)	(1/16-1/8)	(1/64)	(1/64-1/16)
		pockets
	58	Darning mediumweight fabrics					A
			7.0	2.5-7.0	2.0	0.4-2.5		3
Darning stitch
	59	Darning thick fabrics	(1/4)	(3/32-1/4)	(1/16)	(1/64-3/32)

CAUTION

●Be sure to turn off the main power before replacing the pressor foot. Otherwise, injuries may occur if (Start/stop button) is accidentally pressed and the machine starts sewing.

Triple stretch stitching

Use triple stretch stitching to reinforce sleeve holes and inseams.

aAttach zigzag foot "J".

J

•For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43).

bSelect stitch 4 .

•For details, refer to "Selecting stitching" (page 49).

Bar tack stitching

Bar tacks are used to reinforce points subject to strain, such as pocket corners and openings.

As an example, the procedure for sewing bar tacks at pocket corners is described below.

cStart sewing.

• For details, refer to "Starting to sew" (page 51).

Reinforcement Stitching 103