Brother 885-V31/V33 Editing and Saving Patterns, Adjusting the layout and the size

————————————————————————————————————————————————————

Editing and Saving Patterns

This section describes ways to edit, adjust, reposition and memorize patterns.

Adjusting the layout and the size

The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size.

Memo

zKeys that appear surrounded with a dotted

line (ex. ) cannot be used.

aAfter selecting. the embroidery pattern, press

XThe sewing screen is displayed.

bPress .

XThe layout LCD is displayed.

cCheck and adjust the layout.

aLayout within the frame

bDisplay unit (cm/INCH)

cAvailable embroidery frames

dChange position keys

eSize key/Layout key

f	Rotation key	4
g	Horizontal mirror image key

h Trial key

i Starting point key

j Distance from the center k Embroidery size

Embroidery frame size These flash if the pattern was resized, the layout was adjusted, or the recommended embroidery frame size was changed. Embroidery frame icons that appear in gray cannot be used.

CAUTION

●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the presser foot and cause injury or needle breakage.

Editing and Saving Patterns 143