HOW TO ADJUST THE PICTURE
The first step in adjusting the video quality is to display text and a graphic on your monitor (i.e. desktop icons). Then set your computer to the resolution that you will be using most frequently. The dip switches are used to set the focus and sharpness of the picture to the best possible setting. Set the dip switches to the settings that are recommended for the different lengths of CAT5 cable (see chart below). Verify that the picture quality is to your satisfaction. If the recommended setting does not produce a great quality picture, try using a different dip switch setting. The trim pod next to the Component connector on the 1x8 Component CAT5 DA R allows brightness adjustments for video.
All dip switches OFF for all colors. | |
Set dip switch #1 ON all colors. 2,3,4 remain OFF. | |
Set dip switch #2 ON all colors. 1,3,4 remain OFF. | |
Set dip switch #3 ON all colors. 1,2,4 remain OFF. | |
301 Feet and Up | Set dip switch #4 ON all colors. 1,2,3 remain OFF. |
NOTE: The dip switches are set to the OFF position when the switch is closest to the number or in the down position.
7