Gefen CAT-5 DA user manual

Connecting and Operating the 1x8 Component CAT5 DA

How to Connect the 1x8 Component CAT5 DA to your devices

1Connect the supplied VGA to Component cable from the Component video source into the 1x8 Component CAT5 DA Sender "Comp In" port.

2Connect a CAT-5e* cable from the "CAT5 Video Outs" on the 1x8 Component CAT5 DA Sender to the "CAT5 Inputs" on the Component CAT5 Distribution Receiver. (Repeat for each Receiver unit)

3Connect the VGA to Component cable from the display to the "Comp Out" on the Component CAT5 Distribution Receiver. (Repeat for each Receiver unit)

4Plug the 5VDC power supply into the 1x8 Component CAT5 DA Sender.

6