For Machines Mfg. Since 3/11

S E R V I C E

Turn-Nado®Gearhead Lathes

Spindle Clutch

Adjustment

This lathe uses a dual-clutch mechanism to drive the spindle. The clutch assembly will need to be adjusted if you have difficulty engaging the forward or reverse spindle lever position or if the chuck takes more than 3–4 seconds to reach full speed when set at the highest spindle speed.

DISCONNECT LATHE FROM POWER before performing this procedure. Failure to do so could result in accidental startup, electrical shock, entanglement or crushing injury, or property damage.

DO NOT touch hot components. During use, the clutch and other internal components can become very hot. Wear heavy gloves or allow components to cool before service.

Wear safety glasses throughout the entire procedure. Oil may splash and spring-loaded components may be thrown, resulting in injury or loss of vision.

DO NOT rotate the spindle or input pulley by hand while hands or fingers are inside the headstock. Doing so may cause entanglement and serious crushing injuries.

Support components while their mounting fasteners are being removed. Components may fall or swing outward if they are not properly supported, resulting in crushing or laceration injuries.

Required for Procedure

Qty

Wrench 4mm

1

Another Person

1

To adjust the spindle clutch:

1.DISCONNECT LATHE FROM POWER!

2.Move the spindle lever to the center (neutral) position.

3.Have another person support the electrical cabinet, then remove the three button-head cap screws shown in Figure 122.

Figure 122. Removing electrical cabinet fasteners.

4.Tilt the cabinet out enough to allow access to the clutch access cover, being careful not to strain the lamp or chuck guard safety switch cords. If necessary, remove these components to prevent straining them.

Rest the cabinet on a stable support.

5.Remove the clutch access panel from the rear of the headstock to expose the dual-clutch mechanism (see Figure 123).

Clutch Access

Panel

Figure 123. Spindle access panel.

-81-

Page 82 Page 84
Page 83
Image 83
Southbend SB1046PF owner manual Spindle Clutch Adjustment, To adjust the spindle clutch
Page 82 Page 84

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.
Top Page Image Contents