I N T R O D U C T I O N | For Machines Mfg. Since 3/11 |
Control Panel
H
I J
G 
Figure 4. Control panel.
G.Power Light: Illuminates when lathe controls are receiving power.
H.Coolant Pump OFF & ON Buttons: Control the coolant pump motor.
I.Spindle Motor OFF & ON Buttons: Controls the spindle motor.
J.STOP Button: Stops all machine functions. Twist clockwise to reset.
Carriage |
|
|
|
N |
|
|
|
|
|
| O |
M |
|
| R |
|
|
| |
L |
| Q | S |
|
| ||
K |
|
| |
| P | T | |
|
| ||
|
|
| U |
| W | V |
|
|
|
| |
| Figure 5. Carriage controls. |
| |
K.Carriage Handwheel: Moves the carriage along the bed. Can be disengaged during power feed operations to prevent an entanglement hazard.
L.Cross Slide Handwheel: Moves the cross slide toward and away from the workpiece.
M.Compound Rest Handwheel: Moves the tool toward and away from the workpiece at the preset angle of the compound rest.
N.
O.Coolant Flow Control Lever: Controls the flow of coolant from the nozzle.
P.
Q . Half Nut Lever: Engages/disengages the half nut for threading operations.
R.Carriage Lock: Secures the carriage in place when the carriage should not move.
S.Thread Dial and Chart: Dial indicates when to engage the half nut during threading operations. Chart indicates on which thread dial reading to engage the half nut for specific inch thread pitches.
T.Spindle Lever: Starts, stops and reverses direction of spindle rotation.
U.Feed ON/OFF Lever: Engages/disengages power feed.
V.Apron Feed Direction Knob: Changes direction of carriage or the cross slide feed without having to stop the lathe and move the headstock feed direction lever.
W.Feed Selection Knob: Selects the carriage or cross slide for power feed.
