For Machines Mfg. Since 3/11 Turn-Nad o® Gearhead Lathes
-135-
PARTS
Rear Machine LabelsThe safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. T he owner of this machine MUST maintain t he
original location and readability of these safety labels. If any lab el is removed or becomes
unreadable, REPLACE that l abel before using the machine again. C ontact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlat he.com to order new labels.
WARNING!
!
!INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING!
!
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
All labels must be made from an oil-resistant materialWARNING!
!
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING!
!
!INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING!
!
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
All labels must be made from an oil-resistant materialWARNING!
!
POISON/
BIOHAZARD
Refer to the cutting
fluid manufacturer’s
Material Safety Data
Sheets (MSDS) for
WARNING!
!
ENTANGLEMENT
HAZARD
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING!
!
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
INJURY HAZARD
Do not use machine
if you have not read
the manual. Visit
southbendlathe.com
or call 360-734-1540
to get a manual.
WARNING!
!
WARNING!
!
!INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING!
!
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
!
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
!
EYE INJURY
Always wear ANSI
approved safety
glasses when using
this machine.
SB1057F Labels (C)
440V
3-Ph
4,8,12,16,20,24,28,32,36,40,44,48,56,60,72Any PositionIn.Non-NumberedPosition
Numbered Position
1,2,3,4Position
1,3 or 2,4Position
1 Only2,6,10,14,18,22,26,30,543,5,7,9,11,13,15,19,23,272½,3½,4½,7½,11½,13½2¼,2¾,3¼,3¾27∕81
2
3
4
Same as Metric ThreadsAll labels are shown at 100% and must be made from an oil-resistant material.ONE SHOT
OILERNOTICELoosen the carriage lock bolt before engaging the carriage leadscrew.
Factory must verify accuracy of this label2118
2119
2103
2103
REF PART # DESCRIPTION REF PART # DESCRIPTION