Turn-Nado®Gearhead Lathes

P R E P A R A T I O N

For Machines Mfg. Since 3/11

Lubricating Lathe

GEARBOXES MUST

BE FILLED WITH OIL!

LATHE MAY NOT

HAVE OIL INCLUDED!

Refer to the Lubrication Section in this Manual for Recommended Oil Type.

The headstock, quick-change gearbox, and apron oil reservoirs must have the proper amount of oil in them before the lathe can be operated for the first time.

Damage caused to the bearings and gears from running the lathe without oil in the reservoirs will not be covered under warranty. Refer to the Lubrication section, beginning on Page 68, for details on how to check, add oil, and prime the headstock oil pump.

In addition to the reservoirs, we also recommend that you lubricate all other points on the machine at this time. This can be accomplished by following the maintenance schedule on Page 66.

Note: If this lathe was shipped with oil in the reservoirs, do not change that oil until after the test run and spindle break-in procedures.

Adding Coolant

Add the coolant of your choice now. For detailed instructions on where the coolant tank is located and how to add fluid, refer to Coolant System Service on Page 74.

Power Connection

After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply.

Due to the complexity required for planning, bending, and installing the conduit necessary for a code-compliant hardwire setup, an electrician or qualified service personnel MUST perform this type of installation.

Hardwire setups typically require power supply wires to be enclosed inside of a solid or flexible conduit, which is securely mounted at both ends with the appropriate conduit fittings. All work must adhere to the required electrical codes.

The hardwire setup must include a locking disconnect switch (see Figure 21) between the power source and the machine. This switch serves as the means to completely disconnect the machine from power to prevent electrocution from accidental startup during adjustments, maintenance, or service to the machine.

 

 

Locking

 

Power Source

Disconnect Switch

Machine

Conduit

Conduit

 

Figure 21.Typical hardwire setup with a locking

disconnect switch.

-30-

Page 32
Image 32
Southbend SB1046PF owner manual Lubricating Lathe, Adding Coolant, Power Connection

SB1046PF specifications

The Southbend SB1046PF is a popular choice among culinary professionals and passionate enthusiasts alike. This heavy-duty gas range is designed to meet the demanding needs of busy kitchens, providing exceptional performance and reliability. Ideal for restaurants and catering services, the SB1046PF is equipped with features that promote efficiency and ease of use.

One of the standout features of the Southbend SB1046PF is its robust construction. Built with a stainless steel exterior and a welded frame, this range is designed for longevity and durability. The high-quality materials resist scratches and corrosion, making it not only functional but also aesthetically pleasing for any kitchen environment.

The SB1046PF comes with six powerful burners, each with a total output of 32,000 BTUs. This ensures a rapid boil and consistent heat distribution, allowing chefs to cook multiple dishes simultaneously. The burners are equipped with lift-off heads for easy cleaning, further enhancing the unit's usability in a fast-paced kitchen.

Adding to its versatility, the Southbend SB1046PF features an integrated standard oven, which offers even more cooking options. The oven has a total BTU rating of 35,000, providing ample heat for baking, roasting, or braising. It features a porcelain enamel interior, which helps simplify cleaning, while the oven door is designed with a cool-to-touch, ergonomic handle for safe operation.

The oven’s capabilities are complemented by a variety of cooking technologies. The SB1046PF includes a flame failure safety device to prevent gas leaks, ensuring a safe cooking environment. Additionally, the range's powered convection system allows for better heat circulation, resulting in perfectly cooked food each time.

Another notable characteristic of the Southbend SB1046PF is its user-friendly controls. The intuitive thermostatic controls provide precise temperature management, enabling chefs to execute their recipes accurately. Furthermore, the unit is designed for easy installation, fitting seamlessly into standard kitchen layouts.

In conclusion, the Southbend SB1046PF is a commercially designed gas range that combines robust features with advanced cooking technologies. Its solid construction, powerful burners, efficient oven, and safety features make it an excellent choice for any high-demand kitchen, ensuring that culinary professionals have the tools they need to create exceptional dishes consistently.