Basic Operations
Operation
4
3
6
7
8
5
EXAMPLE 
5INPUT 1 Mode | INPUT 2 Mode |
3Slide the zoom knob. The image can be adjusted to the desired size within the zoom range.
4Slide the focus knob until the image on the screen becomes clear.
5 Press INPUT to select the desired input mode. |
Press INPUT again to change the mode. |
d
INPUT 4 (S-VIDEO) Mode
g
f
INPUT3 (VIDEO) Mode
s
• When no signal is being received, “NO SIGNAL” will be |
displayed. When a signal that the projector is not preset |
to receive is being received, “NOT REG.” will be displayed. |
6Press VOLUME / to adjust the volume.
7Press MUTE to temporarily turn off the sound. Press MUTE again to turn the sound back on.
8 Press POWER OFF. |
Press POWER OFF again while the message is |
displayed. |
6
7
8
• If you accidentally pressed POWER OFF and do not want |
to turn off the power, wait until the power off screen |
disappears. |
• When POWER OFF is pressed twice, the POWER indicator |
will illuminate red and the cooling fan will run for about 90 |
seconds. The projector will then enter standby mode. |
• Wait until the cooling fan stops before disconnecting the |
power cord. |
• The power can be turned on again by pressing POWER |
ON. When the power is turned on, the POWER indicator |
and the LAMP REPLACEMENT indicator illuminate green. |
• The POWER indicator flashes if the bottom filter cover is |
not securely installed. |
