Replacing the Projection Lamp
7 Remove the lamp cage cover. | 8 Remove the lamp cage. |
Turn over the projector and loosen the user service screw that secures the lamp cage cover. Then slide the cover in the direction of the arrow.
Remove the securing screws from the lamp cage. Hold the lamp cage by the handle and pull it towards you.
Securing | Securing | |
screw | ||
screw | ||
| ||
User service |
| |
screw |
|
9 Insert the new lamp cage. | 10 Attach the lamp cage cover. |
Press the lamp cage firmly into the lamp cage compartment. Fasten the securing screws.
Slide the lamp cage cover in the direction of the arrow. Then tighten the user service screw.
User service 
screw
&Troubleshooting
Maintenance
Resetting the lamp timer
1 cord.Connect the power | 2 Reset the lamp timer. |
|
|
| ||||
Plug the power cord into the AC | While pressing ƒ, © and | “LAMP 0000H” is displayed, | ||||||
socket of the projector. | ENTER on the projector, press | indicating that the lamp timer is | ||||||
|
|
|
|
| POWER ON on the projector. | reset. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
⮕
•Reset the lamp timer only after replacing the lamp.
