Computer Image Adjustments (INPUT 1 or 2 mode Only)
Projector | Remote control | Auto Sync Adjustment |
1, 5
2, 3, 4
AUTO SYNC
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by setting “Auto Sync” to “ON” in the projector’s GUI menu.
When “Auto Sync” is set to “ON”:
•The sync adjustment is automatically made each time the projector is turned on while connected to a com- puter or the input selection is changed.
•The Auto Sync adjustment setting previously made is cleared when the projector’s setting is changed.
button
(GUI) On-screen Display
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Auto Sync”.
4Press ß/© to select “ON”.
5To exit from the GUI, press MENU.
MOUSE ADJ.
Operation
On-screen Display
g
f
s
(GUI) On-screen Display
•Automatic adjustments can be made by pressing AUTO SYNC.
•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 31.)
During Auto Sync adjustment, the
•Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.
Auto Sync Display Function
Normally, an image is not superimposed during Auto Sync adjustment. You can, however, choose to superimpose a background image during Auto Sync adjustment.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU.
2Press ß /© to select “Fine Sync”.
3Press ∂/ƒ to select “Auto Sync Disp”.
4Press ß/© to select “
” to superimpose a background image or “
” to remove the background image during Auto Sync adjustment.
5To exit from the GUI, press MENU.
