Setup Connections&

Connecting the Projector

Connecting the Remote Mouse Receiver

You can use the remote control as a remote mouse.

Connecting to the USB port on a PC or Macintosh

1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer. 2 Connect the other end to the USB port on the remote mouse receiver.

USB mouse control cable QCNWG0007CEPZ

Remote mouse receiver RUNTK0673CEZZ

Use the USB port (PC or Macintosh) to connect the supplied

USB portUSB mouse control cable to the remote

mouse receiver.

Connecting to the PS/2 port on a PC

1 Turn off the power of the PC.

2 Connect one end of the PS/2 mouse control cable to the corresponding terminal on the 3 Connect the other end to the PS/2 port on the remote mouse receiver.

4 Turn on the power of the PC.

PS/2 port

PS/2 mouse control cable (commercially available)

PC.

Remote mouse receiver RUNTK0673CEZZ

Use the PS/2 port (PC) to connect the PS/2 mouse control cable to the remote mouse receiver.

CAUTION

Do not connect or disconnect the mouse control cables to or from the computer while it is on. This may damage your computer.

Do not connect both the PS/2 and USB mouse control cables to the remote mouse receiver.

Windows 95 does not support USB mouse driver software.

The minimum system requirements for the USB type mouse system are shown below.

Windows

Hardware: PC/AT compatible machine with USB port that has Windows 98/Windows 2000 or higher installed.

OS: Windows 98/Windows 2000 or higher

Macintosh

Hardware: Macintosh series with USB port

OS: Mac OS 8.5 or higher

The wireless mouse functions can be used to operate computers compatible with PS/2 or USB type mouse systems.

E-17

Page 18
Image 18
Sharp XG-C40XU operation manual Connecting the Remote Mouse Receiver, PS/2 port