Computer Image Adjustments (INPUT 1 or 2 mode Only)

Projector

Remote control

1, 5

2, 3, 4

Adjusting the Computer Image

When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer image.

Description of Adjustment Items

Selected item

Description

 

 

Clock

Adjusts vertical noise.

Phase

Adjusts horizontal noise (similar to tracking on your VCR).

H-Pos

Centers the on-screen image by moving it to the left or right.

V-Pos

Centers the on-screen image by moving it up or down.

Operation

 

 

 

• Computer image adjustments can be made easily by

 

 

 

pressing AUTO SYNC ( ). See page 34 for details.

 

(GUI) On-screen Display

 

(Select the desired computer input mode with INPUT.)

2

 

 

(Slide the MOUSE/ADJUSTMENT switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MOUSE

 

ADJ.

 

 

 

on the remote control to the ADJ. position.)

 

 

 

 

 

 

1 Press MENU. Menu bar and “Picture” menu

 

 

 

screen appear. GUI operation guide is also

 

 

 

displayed.

 

 

 

2 Press ß/© to select “Fine Sync”.

3

 

 

3 Press /ƒ to select a specific adjustment item.

 

 

 

 

 

 

 

 

 

 

4 Press ß/© to move the mark of the selected

 

 

 

adjustment item to the desired setting.

 

 

 

5 To exit from the GUI, press MENU.

 

 

 

• To reset all adjustment items, select “Reset” on the “Fine

 

 

 

Sync” menu screen and press ENTER.

 

 

 

E-31

Page 32
Image 32
Sharp XG-C40XU operation manual Computer Image Adjustments Input 1 or 2 mode Only, Adjusting the Computer Image