Wireless-G PrintServer
The Front Panel
The PrintServer’s LEDs are located on the front panel.
Power | Green/Orange. If the Power LED is continuously lit green, then the PrintServer is ready for use. |
| The LED flashes green when the PrintServer is booting up, a system |
| firmware is being upgraded. It lights up orange when there is an error. |
Ethernet | Green/Orange. If the Ethernet LED is continuously lit green, the PrintServer is successfully |
| connected to a device through the Ethernet port. The LED flashes green when the PrintServer |
| is actively sending or receiving data from the wired network. It flashes orange when there are |
| collisions detected on the Ethernet port. |
Wireless | Green. The Wireless LED serves two purposes. If the LED is continuously lit, the PrintServer is |
| successfully connected to the wireless network. If the LED is flashing, the PrintServer is |
| actively sending or receiving data from the wireless network. |
USB | Green/Orange. The USB LED lights up green when there is a printer connected to the USB port. |
| The LED flashes green when the PrintServer is sending data through the USB port. It lights up |
| orange when there is a problem with the USB printer. |
Chapter 2: Getting to Know the PrintServer
Figure 2-2: PrintServer’s Front Panel
5
The Front Panel
