4.The Basic Settings screen will appear. If you want to change the Device Name or Domain Name, enter the Device Name and Domain Name in the respective fields.
Click Next to continue, or click Back to return to the previous screen.
5.The IP Settings screen will appear. If your network uses a router with a DHCP setting that automatically assigns IP addresses, select Automatically obtain an IP address (DHCP). If your network uses a static IP address, select Set IP configuration manually, and enter the IP Address, Subnet Mask, and Gateway in the fields provided.
Click Next to continue, or click Back to return to the previous screen.
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Figure
Figure
ip address: the address used to identify a computer or device on a network
static ip address: a fixed address assigned to a computer or device connected to a network.
ip (internet protocol): a protocol used to send data over a network
9
Installation
