Linksys WPS54G manual Configuration AppleTalk

Wireless-G PrintServer

Apple Talk

•Zone Name. Typically only Macintoshes use AppleTalk, although other platforms can use it if they have the necessary, third-party software installed. Enter the Zone Name in the field provided.

•Port Setting. Select the port number from the drop-down menu. The Printer Type can be obtained from the manufacturer of the printer. Enter the type of printer in the Printer Type field. For each printer connected to the PrintServer, you will choose the Communications Protocol that allows the devices on the network to communicate. Select the type of Communication Protocol you will use, ASCII or Binary for each printer, according to the recommendation of the printer’s manufacturer. For more information, refer to the printer’s documentation.

Click the Get Defaults button if you want to cancel your changes and use the default settings.

When finished making your changes on this tab, click the OK button to save these changes, or click the Cancel button to undo your changes. For more information, click the Help button.

Chapter 7: Bi-Admin Management

Figure 7-12: Configuration - AppleTalk

37

The Bi-Admin Management Utility