Linksys WPS54G manual The Printer Tab - Logical Port, Select Printer, Details

Wireless-G PrintServer

The Printer Tab - Logical Port

The Logical Printers tab contains the logical printer settings of the PrintServer. Configure them for each Logical Printer.

The PrintServer has six logical or virtual printer ports. For example, you can have three different configurations for your parallel printer: Logical Printer 1 for landscape orientation, Logical Printer 2 for double-sided copies, and Logical Printer 3 for manual feed. Then you will map Logical Printers 1, 2, and 3 to the physical printer on the PrintServer’s Parallel port.

Select Printer

Logical Printer No. From the Logical Printer Port No: drop-down menu, select the number (1-6) of the printer you wish to configure. Click the Get Data button to update the display with the current data for the selected logical printer.

Details

Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.

Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.

Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed).

Click the Save button to apply your changes, or click Cancel to cancel your changes.

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Figure 6-10: Printer - Logical Port

27

The Printer Tab - Logical Port