Appendix D Upgrading Firmware, Wireless-G PrintServers

Appendix D: Upgrading Firmware

Use the PrintServer’s Web-based Utility to upgrade its firmware. Follow these instructions:

1.Visit www.linksys.com and download the firmware upgrade file for the Wireless-G PrintServer.

2.Extract the file on your computer.

3.Open the PrintServer’s Web-based Utility.

4.Click the Status tab, and then click the Device tab.

5.On the Device screen, click the Upgrade button.

6.On the Firmware Upgrade screen, enter the location of the extracted firmware file, or click the Browse button to find this file.

7.Click the Start Upgrade button, and follow the on-screen instructions.

Figure D-1: Status Tab - Device

Figure D-2: Firmware Upgrade

Appendix D: Upgrading Firmware