Brother 885-V31/V33 operation manual Do not press Thread cutter button

————————————————————————————————————————————————————

hStartSet thesewing.sewing speed controller to the left (so that the speed will be slow).

XThe sewing machine automatically stops after sewing reinforcement stitches.

Note

z Do not press (Thread cutter button).

iPull the upper thread at the end of the stitching to the wrong side of the fabric, and then tie it with the bobbin thread.

Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching.

jWhen you have finished attaching the button,

slide the drop feed lever to (to the right as seen from the rear of the machine) and turn the handwheel to raise the feed dogs.

Memo

zThe drop feed lever is normally set to the right side.

3

Buttonhole Stitching 89