![](/images/new-backgrounds/1233064/23306435x1.webp)
Playback Features
Starting disc playback
1Turn on the TV and select the correct video input.
2Press POWER ^/l to turn on the DVD
player.
3Press OPEN/CLOSE ; to open the disc
tray.
4Place a disc into the disc tray with the
label facing up, then press OPEN/CLOSE
;to close the disc tray.
For
5Playback may start automatically. If not, press PLAY/PAUSE q/h.
If a disc menu appears on the TV, see next page > Using the disc menu.
If the child lock was activated for the inserted disc, you have to enter your four-
digit password (see DVD Menu options > Password). ( page 28)
See the next few pages for other playback features under ‘ Playback features ’.
Tips:
–Do not overturn the DVD player while disc loading, playing or ejecting.
–Do not close the disc tray manually even if the power switched off.
Basic playback controls
Unless otherwise stated, all operations described are based on remote control use.
Pausing playback
1During playback, press PLAY/PAUSE q/h to pause playback and display a still picture.
Sound will be muted.
2To resume normal playback, press PLAY/ PAUSE q/h again.
Skipping title/chapter/track
To select sequentially
Press SKIP u / i to go to the previous or next title/chapter/track.
To select directly (chapter/track only) Use the numeric keypad
e.g., 5: 5
15: >=10 1 5
Stopping playback
Press STOP g.
The stopped position is memorized.
Resume play function
Press PLAY/PAUSE q/h to restart from this position.
The position is cleared if the tray is opened or you press STOP g several times to display ‘g’ on TV’s display.
Tips:
–Screen saver will start automatically if the disc playback is stopped for about 5 minutes.
–The player will automatically switch to Power Standby mode if you do not press any buttons for about 25 minutes after the disc has stopped playing.
Tips: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
18
18