∫ “AUDIO” menu
SETTING STATE | Display the current setting of the items below | ||
|
|
|
|
PCM OUTPUT | UP TO 48 kHz: |
| |
Check the digital input | When connected to equipment compatible with | ||
limitations of the | 44.1 or 48 kHz | ||
equipment you connect | UP TO 96 kHz: |
| |
using COAXIAL terminal | When connected to equipment compatible with | ||
and select the maximum | 88.2 or 96 kHz | ||
sampling frequency of | ≥Signals from | ||
PCM digital output. | 48 or 44.1 kHz. |
| |
| ≥Some equipment cannot handle sampling | ||
| frequencies of 88.2 kHz, even if they can handle 96 | ||
| kHz. Read your equipment’s operating instructions for | ||
| details. |
| |
DOLBY DIGITAL | BITSTREAM |
| Select “BITSTREAM” when the |
With COAXIAL |
|
| equipment can decode the bitstream |
connections (➜ 7) | PCM |
| (digital form of |
|
|
| Otherwise, select “PCM”. (If the |
DTS | BITSTREAM |
| |
| bitstream is output to the equipment | ||
With COAXIAL |
|
| |
|
| without a decoder, high levels of | |
connections (➜ 7) | PCM |
| |
| noise can be output and may | ||
|
|
| |
MPEG§5, 6, 7 | BITSTREAM |
| |
| damage your speakers and hearing.) | ||
With COAXIAL | PCM |
|
|
connections (➜ 7) |
|
| |
DYNAMIC RANGE | ON: Adjusts for clarity even when the volume is low | ||
| through compressing the range of the lowest | ||
| sound level and the highest sound level. | ||
| Convenient for late night viewing. (Only works | ||
| with DOLBY DIGITAL) | ||
| OFF |
| |
|
|
|
|
∫“DISPLAY” menu
SETTING STATE | Display the current setting of the items below |
| |||
|
|
|
|
| |
LANGUAGE | §5, 6 ENGLISH | FRANÇAIS | ESPAÑOL | DEUTSCH | |
|
| ITALIANO | SVENSKA | NEDERLANDS POLSKI | |
| §7 | ENGLISH | FRANÇAIS | ESPAÑOL | DEUTSCH |
|
| РYCCKNЙ MAGYAR | ČESKY | POLSKI | |
| §8 | ENGLISH |
|
|
|
|
|
|
|
|
|
∫“OTHERS” menu
SETTING STATE | Display the current setting of the items below | |
|
| |
REGISTRATION | You need this registration code to purchase and play DivX | |
Displays the unit’s | ||
registration code. | Select “SHOW CODE” and press [ENTER]. | |
| (➜ 18, About DivX VOD content) | |
|
| |
JPEG TIME | To change the slideshow timing | |
| 1 SEC to 15 SEC (in 1 unit) | |
| 15 SEC to 60 SEC (in 5 unit) | |
| 60 SEC to 180 SEC (in 30 unit) | |
| ≥“3 SEC” is the factory preset. | |
FL DIMMER | BRIGHT |
|
Changes the | DIM |
|
brightness of the | AUTO: The display is dimmed, but brightens only when you | |
unit’s display. |
| perform some operations. |
|
|
|
AUTO POWER OFF | ON: | The unit switches to standby mode after about 30 |
| OFF | minutes in the stop mode. |
|
| |
|
| |
QUICK SETUP | Select “SET” and press [ENTER]. | |
DEFAULTS | Select “RESET” and press [ENTER]. | |
This returns all | The password screen is shown if “RATINGS” (➜ 16) is set. | |
values in the setup | Please enter the same password with the numbered buttons, | |
menus to the default | then press [ENTER], then turn the unit off and on again. | |
settings. |
|
|
|
|
|
§1 Language options [The\United\Kingdom,\Republic\of\Ireland,\Australia\and\N.Z.]:
FRENCH, SPANISH, GERMAN, ITALIAN, SWEDISH, DUTCH and POLISH [The\Middle\East\and\South\Africa]:
FRENCH, SPANISH, GERMAN, RUSSIAN, HUNGARIAN, CZECH and POLISH [Asia]: CHINESE TRAD.
§2 The original language designed on the disc is selected. §3 Input a code number referring to the table (➜ 18).
§4 If the language selected for “AUDIO” is not available, subtitles appear in that language (If available on the disc).
§5 [The\United\Kingdom\and\Republic\of\Ireland] §6 [Australia\and\N.Z.]
§7 [The\Middle\East\and\South\Africa] §8 [Asia]
RQTC0118Changing the player settings
17