Panasonic DVD-S33 specifications Guide

≥Trouble may have occurred. Turn the unit off and then back

to ON. Alternatively, turn the unit off, disconnect the AC

mains lead, and then reconnect it.

≥If the service numbers fail to clear, note the service number

and contact a qualified service person.

≥You haven’t inserted a disc: Insert one.

≥You haven’t inserted the disc correctly: Insert it correctly. (8)

≥Set ADVANCED SURROUND to “OFF”. (10)

≥If you have connected a digital amplifier which does not include

decoder, be sure to select “PCM” in “DOLBY DIGITAL”, “DTS”

or “MPEG§3” in “AUDIO” menu. (17)

≥None of the audio effects work when the unit is outputting

bitstream signals from the COAXIAL terminal. (7)

≥Some audio effects do not work or have less effect with

some discs.

≥ADVANCED SURROUND does not work if you have

changed the play speed. (10)

≥There may be a pause in sound when you change the play

speed.

≥[DivX] Audio may not be output due to how files were

created. (5)

≥Trouble may have occurred. The number following “ERR H”

depends on the status of the unit. Turn the unit off and then

back to ON. Alternatively, turn the unit off, disconnect the AC

mains lead, and then reconnect it.

≥If the service numbers fail to clear, note the service number

and contact a qualified service person.

≥The disc may be dirty. (22)

≥You haven’t inserted the disc correctly: Insert it correctly. (8)

≥The operation is prohibited by the unit or disc.

≥You haven’t inserted a disc: Insert one.

≥You haven’t inserted the disc correctly: Insert it correctly. (8)

≥Audio has not been recorded, or recorded in a format this

Cannot record to

≥You cannot record WMA/MP3.

digital recording

≥You cannot record DVDs that have protection preventing

equipment.

digital recording.

(Incorrect sound

≥You cannot record DVDs if the recording equipment cannot

recorded.)

handle signals with a sampling frequency of 48 kHz.

≥Make the following settings:

OFF (10)

– ADVANCED SURROUND:

– PCM OUTPUT:

UP TO 48 kHz (17)

– DOLBY DIGITAL/DTS/MPEG§3:

PCM (17)

unit cannot playback. Video playback only is possible. (5)

≥You inserted a disc the unit cannot play; insert one it can. (4)

≥You inserted a disc that has not been finalized. (4)

≥You inserted a blank disc.

≥You can only play DVD-Video if their region number is the

same or includes the same region number as the unit or if

the DVD-Video is marked “ALL”. Confirm the region number

for the unit on the rear panel. (Cover)

≥You are trying to play the DivX VOD content that was

purchased with a different registration code. You cannot play

the content on this unit. (18)

≥The DivX VOD content has zero remaining plays. You

cannot play it. (18)