STEP 2 The remote control
∫Enjoying multi-channel surround sound
Amplifier with a | Coaxial cable | |||
decoder or a decoder- |
|
|
| |
|
|
| ||
amplifier combination |
|
|
| |
COAXIAL IN |
|
|
|
|
|
|
|
| |
Back of the unit
≥You cannot use DTS Digital Surround decoders not suited to DVD.
Change “PCM OUTPUT”, “DOLBY DIGITAL”, “DTS” and “MPEG§” (➜ 17, “AUDIO” menu).
∫Batteries
R6/LR6, AA
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
setup
§[Except\Asia]
∫Connect the AC mains lead last
[For\the\United\Kingdom,\Republic\of\Ireland,\and\the\Middle\East,\except\United\Arab\Emirates]
[only]
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
AC mains lead
To household mains socket 
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of 7 m directly in front of the unit.
STEP 3 Quick setup
Preparation
Turn on the television and select the appropriate video input on the television.
1Press [Í].
2Press [SETUP].
QUICK SETUP screen appears.
3Follow the
≥Press [RETURN] to return to previous screen.
4Press [ENTER] to finish setting.
5Press [SETUP] to exit the setup menu.
≥To change these settings later, select “QUICK SETUP” (➜ 17, “OTHERS” menu).
RQTC0118 STEP 1 Connection/STEP 2 The remote control/STEP 3 Quick
7