Panasonic DVD-S33 Connection, With Video in or S Video With Scart AV With Component Video

STEP 1 Connection

STEP 1 Connection

≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.

≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.

≥Turn off all equipment before connection and read the appropriate operating instructions.

≥Connect the terminals of the same colour.

≥Unless otherwise indicated, illustrations are of the models for areas except the United Kingdom and Republic of Ireland. ([The\United\Kingdom\and\Republic\of\Ireland] :There is no S VIDEO OUT terminal on the unit.)

Television

RQTC0118

6

§1 When using this connection, the audio cable (red

and white plugs) should also be connected. §2 [Australia\and\N.Z.]: included

\The\Middle\East,\South\Africa\and\Asia\: included

[The\United\Kingdom\and\Republic\of\Ireland]: not included

You can connect the audio cable to the 2- channel audio input terminals of an analog amplifier or system component to enjoy stereo sound.

AV

≥If the television is compatible with S-video, set “VIDEO OUT-SCART” to “S-VIDEO/YPbPr”, or compatible with RGB, set “VIDEO OUT- SCART” to “RGB/NO OUTPUT” for the AV terminals (➜ 16, “VIDEO” menu).

Back of the unit

To enjoy progressive video

Connect to a progressive output compatible television.

1[The\United\Kingdom\and\Republic\of\Ireland]

Set “VIDEO OUT-SCART” to “VIDEO/YPbPr” for component terminals. (➜ 16, “VIDEO” menu).

2Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then follow the instructions on the menu screen (➜ 16, “VIDEO” menu).

[The\United\Kingdom\and\Republic\of\Ireland] Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i . 60p input terminals are progressive compatible.